2. analog
  3. 127079-1975

New Townshend Rock 7 owner

The Townshend is in transit to it's new home. I purchased this one-owner table as a package, complete w/ Funk Firm FXR ll arm, dc motor upgrade, Discovery Balanced phono cable and Brinkman PI cartridge. It come with all original boxes, manuals.

If all goes well, I should be able to get it up and running with one exception, my phono stage is not balanced. Since the original owner bought this from a respected dealer as a package, I think my best route would be to get a pair of RCA to XLR adapters in order to hear the package as close as possible as was intended.

Any thoughts on that aspect? What brand adapters would be recommended? Also, any thing I might need to know from experienced users to help with set-up? Thanks.
128x128slaw
slaw's avatar
slaw OP
21,864 posts
 
I've reached the limits of my EAR 834 P mc/mm w/ volume phono.

I just put in a request to K & K Audio for my ultimate phono only preamp.
bdp24's avatar
bdp24
9,873 posts
 
Ooh, how cool Slaw! I didn't hear about K & K until after I had already gotten my Herron phono pre. I'm impressed by what I've read on the K & K website---very impressed.
slaw's avatar
slaw OP
21,864 posts
 
In the short time I've owned this amazing tt, I noticed the set screws that level my motor have quite a bit of play. This is a major source of vibration.

My current tt platform is a Symposium Ultra. When I would set the Merlin to 45rpm, I'd get an audible noise.

My solution is to wrap Teflon tape around them. I start at the bottom in the direction that will tighten the tape as the screws are turned and use no more than 2 & 1/2 rotations as I gradually rise up the screw, stopping at half way up.

I'm surprised that this kind of issue is had for Townshend owners, luckily, there is a easy, LOW cost solution.

Cheers.
bdp24's avatar
bdp24
9,873 posts
 
Slaw, Max is known for two things: his brilliant designs, and his less-than-excellent manufacturing standards. Luckily, the former outweighs the latter, and makes his products, though imperfect, unique and excellent sounding! The arm mounting plate on my Rock Elite, a thin (1/16") stamped piece of steel drilled for Linn arm mounting, was unacceptable. I got a sheet of 1/2" black acrylic and cut myself some mounting boards, damping the bottom with a sheet of lead. Problem solved. The Elite features a steel plinth (like an upside-down muffin tin) filled with plaster-of-Paris, and a black acrylic platter with same. High mass, non-resonant---deader than a doornail!
smctigue1
53 posts
 
I bought my Rock Mk III 21 years ago based on a review by Robert E Green. I haven't felt the need to upgrade since. The Rock uses the inverted ball bearing design and has the solid acrylic platter. I have a OL Silver Mk II on mine - great synergy. Best of luck with it.
More to discover