Taralabs cables

Thieliste,  you get last msg? 

Making Sense of … Evolution Speaker CablesExtreme Audio Systems and Extreme Performance Cables with Low InductanceAt TARA Labs, the major design goal for speaker cables is to reduce the inductance in the cable. However, there are some high-end amplifiers that need to 'see' some level of inductance (L) in the speaker cable. When the low damping factor of certain amplifiers is connected with (ultra-low inductance) TARA Labs speaker cables, the output of some high-end loudspeakers becomes audibly variable at different frequencies.The phenomenon is readily apparent, heard as bass that is soft and low in amplitude, sometimes together with high frequencies that are too smooth or rolled-off. Basically, the resistance in the loudspeaker cable should be ultra-low, and the inductance (L) in the cable needs to be low but sufficient to provide a load to certain amplifiers. There is no ideal value for (L). It varies from system to system, just as impedance varies with frequency in most loudspeakers.The loudspeaker cables carry much higher signal voltage and current into a non-linear impedance (the loudspeaker) ... so the reactive load of the loudspeaker can be difficult for some amplifiers to drive... and the all-important damping factor of the amplifier changes from amplifier to amplifier.One of the great attributes of the OMEGA Evolution & Grandmaster Evolution Speaker Cables is their ultra-low inductance. The OMEGA Evolution & Grandmaster Evolution Speaker Cables are the 'state-of-the-art' in both technology and design from TARA Labs. Its performance level is absolutely spectacular when matched with the majority of high-end audio components available today. And as with an ever increasing introduction of new components into the marketplace, we have found over and over again that not every cable or component has the perfect symbiotic relationship with each other. In these particular instances, there are some amplifiers that need to 'see' some level of inductance (L) in the speaker cable. For certain loudspeakers and amplifiers, TARA Labs has produced another addition to the line-up with the Omega Evolution SP & Grandmaster Evolution SP speaker cables. These cables are designed to work exceptionally well with amplifiers with a low damping factor or loudspeakers with a very reactive load in the lower frequencies.

I live on the Alabama coast,  I'm very glad Clemson won last night's national championship,  of course I won bet's as well,  the funny thing is, I have not seen any Bama car flag's today,  this always happens when Alabama loses!, all comments are welcome about the game. 

Making Sense of …. Grandmaster Evolution DigitalThe TARA Labs Grandmaster Evolution Digital Interconnect uses a pair of RSC® Gen 3 Rectangular Solid Core® conductors.
In the AES/EBU format, the conductors are critically spaced to ensure an exacting 110 Ohm characteristic impedance; this is the AES/EBU format used with XLR connectors.
The RSC Gen 3 conductors are smaller than the Gen 2 version, and this provides a more extended bandwidth for the digital signal.
The TARA Labs Grandmaster Evolution Interconnect uses a system of woven filaments constructed from small Teflon tubes, to expand and displace the shield further away from the signal carrying conductors.
In this way, the Grandmaster Evolution Digital Interconnect is able to reduce digital distortion, called ‘jitter’.
Jitter explains why Digital cables sound different from on to another.
The most significant reason for the different sound in digital recording and playback systems is the phenomenon of ‘errors’.
The most widely known error is called ‘jitter’. Jitter can be thought of as a timing error or a distortion of the digital bit-stream within the digital send and receive components and the digital interconnect cable.
The timing errors (digital jitter) can be reduced by using better quality cable with superior shielding to reject interference within the cable.

I've used Tara Labs cables for about 15 years, tried other cheaper brands and always came back.  Got to visit their facility in Ashland Oregon many years ago when I lived up there.  Super nice people.
Tried a lot of different interconnects and currently using Tara Labs 0.8's for my system.  Sound fantastic...