2. tech-talk
  3. 127952-477

Guide for understanding wire gauge and resistance

The AWG is a logarithmic scale, so given an know resistance or diameter for a certain gauge, you can quickly figure out the resistance and diameter of another gauge number, by addition and subtraction.

Resistance:

  1. AWG 15 is 10 mohm/m.
  2. Adding 3 doubles the resistance, and subtracting 3 halves it.
  3. Adding 10 multiplies the resistance by 10, and subtracting 10 it divides by 10.

Diameter:

  1. AWG 18 has a solid diameter of about 1mm
  2. Adding 6 halves the diameter, Subtracting 6 doubles the diameter
  3. Adding 20 divides the diameter by 10, and subtracting 20 multiplies the diameter by 10.

 I picked this up from the DAYCOUNTER, INC Engineering Services website. They provide an array of services and technical information.

ptss
kijanki's avatar
kijanki
4,428 posts
 
Ptss, I understand you posted this in the context of the speaker cable resistance.  Please take into consideration that most of the speaker impedance is resistive.  8 ohm speaker  will have, most likely, resistance of 6 ohm.  Your 10 mohms, in comparison, means nothing. 
don_c55
1,025 posts
 
"8 ohm speaker will have, most likely, resistance of 6 ohm."

TOTAL NONESENSE!

The typical 8 ohm speaker has a "roller coaster", of varying, impedance (resistance, capacitance, inductance), across the audible audio frequency spectrum.



 
kijanki's avatar
kijanki
4,428 posts
 
Read carefully again - RESISTANCE.  As for impedance - it usually doesn't drop below couple of ohms making 10 miliohms irrelevant.
More to discover