How much gain is needed in a Phono Preamp for a 0.2 to 0.3mv low output moving coil?

Personally I would avoid the Transfiguration/VPI combo. I tried both a Temper Supreme and and Spirit III on my Classic and still got some IGD on hotter records. Tried all manner of alignments and protractors and eventually sold both carts. It was particularly hard to do because they sound so damn good most of the time.

I have an AT ART9 now and that is what I would recommend you start with. Will sound great with most any standard (60db) MC preamp gain.

Not all cartridges work well on a unipivot arm. I would research what owners of VPI's unipivot arm have had best success with. As suggested above, the ART9 is getting great buzz across the board so that would be a Prime candidate, pun intended. ;^)

Dave

I try hard to make a good decision, so I don't have to go thru a bucket of cash trying to get things correct. That is why I started this post. I read reviews just to get a feel for the products but hearing from everybody on Audiogon that have the same interest, means a lot. Sincerely thank you all.  I know the end result is my system and my ears. I have been told by many that synergy is important. Partly the reason I went with the ARC amp and preamp knowing they would mate well and when I want to upgrade they seem to have a good following. I had checked out the AT Art 9 in the last post I did regarding pre and power. I think they were the first to use a nude Shibata tip many moons ago. It seems they have come a long way. I checked the web for an Art 9 and they are no longer made. I saw the Art 1000 and figured it was the replacement for Art 9, but I quickly realized I was completely wrong.
Please keep the comments coming. As you can see I need help but i am getting there.

http://www.lpgear.com/product/ATART9.html

I just solved for this very situation.  Purchased a Dynavector 20x2L with 0.3 mv and my BAT VK-P5 pre-amp offered a max gain of 56dB which was not enough.  Replaced with an Avid Pellar at the 70dB gain setting which is pretty much just right for this cartridge's output.