Eminent Technology ET-2 Tonearm Owners

No dust cover?  How do you sleep at night?😰   Ok, a little hard to see from your pictures, but it looks like I just glue (super glue?) extra leaf springs to the front side of the I Beam (the side with the numbers).  I shot off an email to Bruce and told him you were the source of my inquiry/purchase.  I'll let you know results.  

I have corresponded with Bruce a couple times over the years and always found him most helpful.  BTW, my brother-in-law, also an audiophile, had occasion to visit Bruce at his home/factory several years ago while on a business trip to Tallahassee.  He said it was a most interesting visit.  

I envy you with your two listening rooms.  Mine is 1/2 of our living room so there are limits to what my wife can accept.  😢

FYI, my ET II is mounted on a VPI HW 19 (MK III I Think) upgraded with the original SAMA, TNT platter and bearing.  I use the Phorpenix Eagle and Roadrunner for speed control.  If you haven't come across these, I highly recommend them.  They keep speed on my rig locked in to within .002 RPM.

Hope  I'm not wearing you out.  I'm a retired 73 year old so I have lots of time on my hands.  I have an interesting historical note on my preamp.  If you are interested let me know.

Harry

How do you sleep at night ?

When I first discovered the silk thread/string gone, I panicked and looked at the exposed tonearm wiring. It was intact. Then I looked for the cantilever on the cart. It was still there too. Sigh of relief. She didn’t go to town on it. Door stays closed now. Never did find the silk thread .....don’t know where she dragged it to.

Sounds like you have a well setup rig Harry. I look forward to hearing of the results. Myself, I would keep the trough paddle not touching while you determine which of the I beams work best in your system with that cartridge. The triple I beam will make tracking the most difficult - least amount of damping. This is just like a car on a race track with three suspension settings. Race tracks differ as do LPs especially the eccentric ones. The theory - We are matching the I Beam action to the compliance of the cartridge; at the same changing the resonant frequency of the I Beam with the thicker leaf spring (multiple joined springs) ; to hopefully be more in sync with the less compliance cart. Your ears will tell the real story.

I owned a couple VPI’s in the past. My first ET2 came on a HW19 MKIV with the piano black finish - suspended, but no speed controller. That lead to a TNT that I owned for a few years. My current main table works much differently. The thread is applied loose and the motor delivers shots of power to keep the heavy platter rotating. If I change the speed on the motor a little, the platter speed change does not register till about 5 seconds later. That’s how little effect the motor has on the rotating platter.

Hope I’m not wearing you out.

I really like the AudioGon sharing of info during the winter. Usually on here in the morning. The caffeine kicking in is responsible for all the detail.
Until the bears that Frogman alluded to, take me away in late Spring; the schedule depends on when those pesky black flies calm down. I can deal with mosquitoes, I can deal with horse flies...but those damn blackflies ...

You have me very curious about your preamp ?

The VPI with your first ET2 was the same as mine.  Not sure if mine is a III or IV, but it is piano black, suspended with the acrylic deck and arm board.  I've toyed with the idea of replacing the springs with pucks but am concerned about footfalls with no suspension.  House has wood floors.  Sounds like a very slick bearing on your current platter.

We don't get so many black flies down here in N.C. but my father's family was all from Maine and as a kid we used to go up there for visits.  I do remember the black flies.  Not nice.

My Preamp:
I lived for many years in Fort Lauderdale, Fla.  My favorite audio shop was (and still is) in Hollywood, Fla. (Hollywood Sound),  just a couple blocks from the offices and factory for Straight Wire cable.  In fact the audio shop's owner's wife was the receptionist for Straight Wire.  One day while hanging out at Hollywood Sound I spied a used CAT SL-1 for sale and started salivating.  The SL-1 is the preamp that Straight Wire used during their formative days to develop their interconnect.  It had been modified to move the phono inputs to the left side right next to the first stage tubes of the phono stage (6DJ8's), the point to point wiring had been replaced with Straight Wire and the high/Low switch had been bypassed.  There maybe other mods but those are the only ones I recognized.

To make a long story longer, I bought the SL-1 and have now owned it for close to 25 years.  I have retubed from time to time and had to have the large capacitor in the power supply replaced but that's all I've had to do to it.  I have heard a lot of preamps over the years but, with the exception of a couple of ARC's (10's and 11's)  have never.been tempted to replace it.  Alas, no remote but I'm not yet so lazy or old that I must have a remote.  

Lately, I have been reading about the ARC SP 20.  Haven't heard one yet but the reviews are over the top and it has a remote.  Unfortunately, like most of the current ARC stuff, it is very expensive.  If one comes up on the used market at something I can afford I may have to jump.  I'd like to hear it first but I am very rural and I've found that auditioning in a showroom with someone else's system really doesn't tell all you need to know. 

Quite the story on your special CAT SL1 Harry. Thanks for sharing. Your preamp is a keeper, and I think you will be between a rock and a hard place if you bring another preamp in. I have a story about a preamp too, and find it very ironic after your story.

When I went to audition an ARC Sp11 MKII, some 20+ years ago, the owner selling the SP11 also had a CAT SL-1 in the room. He had just bought the Sp11 MkII on a local audio website. I know because I had missed out on it, but was surprised to see it for sale again so soon. I wasn’t happy that he had raised the price couple hundred, but I probably would never see one again, so I went to see and hear it. One of my preamps at the time was the ARC Sp8 for a number of years, so I brought it along. Long story short. We went back and forth with the 3 preamps listening to music for a few hours. Thinking about it now, isn’t it amazing that complete strangers can do this together ?

Now I know he was not sure if he really wanted to sell it (one reason the session lasted so long); but what was he going to do with two preamps? I ended up going home with it. I sold the sp8 at a later date that year. The Sp8 price has doubled since. There is a real following for that thick sounding Sp8 preamp.

Now the thing about the ARC SP11MKII. We were running it that day in full featured mode where all the features/controls "circuits" are in play. All those circuits can be bypassed with flick of a switch and run in ARC’s hot rod mode. It’s a different beast when run in this mode. Plus it has adjustable gain on a dial, separate from the level/volume. ARC still don’t offer that anymore. I have trialed with some pretty good preamps since, but none have sounded better. So still have it. I consider the SP11 MKII and the CAT SL-1 among those very special Audio Products. I discovered Bruce used an SP11 when he tested out our Acutex.

Also
I am of the opinion after my experiences with trialing other preamps and balanced designs; that if something is designed right and executed well - the single-ended circuit can in fact sound better than balanced because fewer parts are being used. You do have to be more anal with your cable setup, positioning, grounding.

That SP20 you mentioned looks interesting, but you know... I am getting some not great vibes from ARC just from the communication aspect, or lack of, with Kalvin at ARC over the last year. All replies have come back not as Kalvin, but as general ARC Customer Service with not much help except "look in the manual". Not the company in this regard it once was. Used to be able to ring up Leonard or Kalvin, or email, and get a schematic or ask a question. I think those days are gone with the new ownership.

Good morning Chris,
Nice story about your preamp.  These are some of the adventures that make this hobby so much fun.  As you probably are aware ARC was acquired be the huge Sonus Faber conglomerate and it appears their services (and prices) are being affected accordingly.

i have communicated with Bruce and he is making up two new I Beams for me.  One with two springs and one with three.  He was a little skeptical of three springs and had concerns it "would not last."  

In in my impatience, last evening I pressed a small blob of blu tac where the beam attaches to the bearing tube.  It stiffened the spring significantly and I heard a substantial improvement. Lower, tighter bass, more defined images, darker background and far better decay.   Perhaps it was the mood and the wine but I found a big improvement.  I'll let you tonight whether it was real or imagined.
Harry