2. analog
  3. 1325551242

Eminent Technology ET-2 Tonearm Owners


Where are you? What mods have you done ?

I have been using these ET2's for over 9 years now.
I am still figuring them out and learning from them. They can be modified in so many ways. Bruce Thigpen laid down the GENIUS behind this tonearm over 20 years ago. Some of you have owned them for over 20 years !

Tell us your secrets.

New owners – what questions do you have ?

We may even be able to coax Bruce to post here. :^)

There are so many modifications that can be done.

Dressing of the wire with this arm is critical to get optimum sonics along with proper counterweight setup.

Let me start it off.

Please tell us what you have found to be the best wire for the ET-2 tonearm ? One that is pliable/doesn’t crink or curl. Whats the best way of dressing it so it doesn’t impact the arm. Through the spindle - Over the manifold - Below manifold ? What have you come up with ?
128x128ct0517
gyneguy225
93 posts
 
Hey Harry,
I found that it's easiest to set VTA with the Lyra cartridges by starting with the top of the cartridge parallel to the record surface and wiggle up and down from there by ear. -The little gauge that Bruce sells helps with very small adjustments and only $80.
Did you ever deal with Taylor House up in NC? 
Regards and thanks for reading my post,
John
vpi's avatar
vpi
223 posts
 
Thanks for the VTA tip John.  I'll have to look into Bruce's gauge.  Is this his set-up gauge or one just for VTA?   No, I don't recall having dealt with Taylor house.  Where are they?
Harry


gyneguy225
93 posts
 
There's a picture of the VTA gauge on the ET site. Go there-products-ET2.5-VTA gauge.
Taylor House is in Sherrils Ford outside of Charlotte. I think Robert is still in business, but haven't called him in a while. I bought most of my analog gear from him.
John
analogluvr
859 posts
 
Hi guys
john would you want to sell your audio quest?  I had one and loved it so am looking for another to see if my memory of it is as good as reality. Anyone try the alita pump after using the stock et one?  Wondering if it is better. 
gyneguy225
93 posts
 
I've seen the AQ7000 for sale for $300, and I couldn't let it go for that. I have an interesting story about that cartridge. After a few years use, the stylus went missing from the cantilever. -Don't know what happened, but when I let AQ know about it, they offered to send me their demonstrator which was barely used from their demo room in exchange for my worthless mess. I respect that company greatly for that. Anyway, it's my backup, and I have trouble hearing an improvement with my Lyra Kleos. You know that Jon Carr designed both. So, sorry no interest here.
I have an Alita pump on order and will report back my impressions.
Cheers,
John
More to discover