@auxinput - excellent advice re the HDMI switcher. I was not aware that a lower resolution component would impact all switch device outputs. In lieu of a HDMI switcher, could I send all video sources direct to the 4k TV and use the HDMI out from the tv as the SSP-800 audio input? Would I have an audio delay using this configuration?
Classe SSP-800 - Time to move on?
I'm looking for some advice...
I've been a happy owner of a Classe ssp-800 for the past 8 years. Its been a terrific unit and I've found it to be a very musical. Initially I focused on buying a high in audiophile processor that could also function reasonably well as a 2 channel preamp as it made a lot of financial sense at the time.
Since then my system has grown and changed a lot and I now have a dedicated Ayre preamp in the chain for my 2 channel listening which works great.
So my question is with all of the new home theater audio formats(and 4k) coming out and with room correction built in to a lot of processors now does it make sense to move on? I've been specifically looking at the Anthem AVM 60, but am open to suggestions. The whole idea of room correction sounds really good to me.
I would love to hear from some of you previous Classe SSP 800 owners to see if you had any remorse after selling your processor.
Thanks
I've been a happy owner of a Classe ssp-800 for the past 8 years. Its been a terrific unit and I've found it to be a very musical. Initially I focused on buying a high in audiophile processor that could also function reasonably well as a 2 channel preamp as it made a lot of financial sense at the time.
Since then my system has grown and changed a lot and I now have a dedicated Ayre preamp in the chain for my 2 channel listening which works great.
So my question is with all of the new home theater audio formats(and 4k) coming out and with room correction built in to a lot of processors now does it make sense to move on? I've been specifically looking at the Anthem AVM 60, but am open to suggestions. The whole idea of room correction sounds really good to me.
I would love to hear from some of you previous Classe SSP 800 owners to see if you had any remorse after selling your processor.
Thanks
- ...
- 39 posts total
Denny001, I'm looking at doing the same thing, but my plan/hope is that the new oppo 205 with 4k output has two hdmi outs. That way i can run one to my projector and the other to the ssp800 (for audio only). I already do something similar now with the oppo105 and 3D movies. I send all video out of the 105 direct to the projector and the audio to the ssp800 since my ssp800 will not process 3D. |
Looking at the Aurender: https://cdn3.volusion.com/zfaej.gfcbd/v/vspfiles/photos/04DD-AURXA10-7.jpg?1470856254 4 completely independent power supplies, each with its own transformer. One for digital transport, one for each of the analog output stages and one for digital/dac. Looks like a fully balanced/differential configuration. I can totally see where the Classe bypassed would work better because the Classe doesn’t have as much into its audio stages. Classe is a very good HT processor, but like all processors, shared power supply for 8 analog channels. Shared transformer for everything. Switched power supply for digital. I highly doubt that the Lyngdorf will do better than either the Classe or the Aurender, since it now has 16 analog channels to deal with (twice as many as the Classe). Unless your just looking for a higher end HT processor that will support all the new standards and 4K. Also, the Lyngdorf has no analog inputs. |
- 39 posts total