Today I successfully installed a PCB fuse holder into my computer's power supply. The stock fuse had leads soldered to the ends that were then soldered directly to the PCB. It took careful work with the Dremel to widen the PCB inlets to accept the fuse holder and now I can roll fuses with ease. I'll soon order an SR Black fuse to replace the stock fuse rated at 6.3 amps/250V (5 x 20mm).
*This was cut from a post of mine under the Digital label titled "Computer PS Upgrade (Fuse/IEC/Teflon Cap)"
*This was cut from a post of mine under the Digital label titled "Computer PS Upgrade (Fuse/IEC/Teflon Cap)"