Electrical Panel Grounding

Jea - that youtube is exactly what I needed to know. This forum is amazingly helpful because a handful of people, like you, care enough to share.

I live in Denver with my wife, Lori. My system consists of a custom built pre-amp using two B29 tubes and two small front end Mullards. It is with transformer or OTL switchable circuitry, and switchable capacitance so I can tune to the source.
CD's need less and Vinyl more.

The amps are custom made with two 6C33C tubes per monoblock, 4 Mullards for the ancillary functions and a fairly massive output transformer. Class A/B with a solid 60W per side and 5 separate transformers for the various required voltages.

These amps are plenty to power my Soundlab U-2s. I prefer the U-2s 6' x 3' size over its larger brethren. These have been modified is several ways not easy to explain.

All running Audioquest cables, mostly silver over copper. I know that is way more than you asked, but I somehow thought you might find it interesting. One day I do a post on the pictures/system page, as the room is covered with my own acoustic diffusion and absorption panels which were sized and located by ear and trial and error. If you ever want to build your own, I do have some useful tips that will save you from learning the hard way like I did. And they work better than any of the stuff I tried that was made commercially at about 1/10th the cost.

I have learned to appreciate the need for the one point of neutral tie in at the service panel and the tie to ground for lightening. And why the grounds must be tied together for safety,

One theory that lurks is; if all electric power seeks to return to the source, what is that source for the harmonic distortion and noise created by say a neighbors refrigerator or a faulty relay. And what about the energy used in powering a motor. That energy is not returning to the source. And why does the power get so quiet when it is really wet (rain) outside? These are my questions with my thinking that ground may have some influence as the "sump" theory goes. My local friend advocates a ground field of a half-dozen copper clad rods, each with a separate ground wire tie back to the main panel to lower ground resistance. He is a satellite engineer for the railroad, and is personally working on some changes to basic sigma-delta class D technology, so I do have some respect for his opinions.  

My outlets are PS Audio Blaun (sp?) that replace normal outlets with a double box, and have a machined aluminum face plate. They feed into twin PS Audio power regeneration units (one on the front-end and one for the power amps). The feed is not currently from the existing sub-panel and the sub-panel only feeds a set of outdoor receptacles powering the pond and water features that I can completely turn off during listening. So the plan is in formulation. And the sub-panel may need to be redone altogether.  I would only use lager gauge copper wire to create a dedicated audio feed. And historically, I used a metal (wound style) shield for the wiring from the sub-panel to the outlets, I bought my home with the existing wiring in place.

One oddity, at least to me, is that the existing sub-panel has the power take-off from the main panel by using two 20A breakers in the main panel. Both the main and sub-panel are less than 20' from the audio outlets.I always thought you just came off the main bus for sub-panel power.

I look forward to hearing your input.