Eminent Technology ET-2 Tonearm Owners

Just throw some money at it like I did

John - your statement brought back memories. I used to get dropped into various companies with a team, to fix problems. The first thing the CFO would say to us after the kickoff meeting.
  
"Ok , so tell me, how much money is it really going to take to fix this problem? "

Hey Chris,
It's ok to throw money at things as long as you don't spend your capital. Mom told me that a while ago, and it has worked for me. After all, it's only money. -Enjoy it if you've got it. 
Hey Harry,
Do you have the Calypso or Callisto. -Just wondering.
-John

Re "straight shot to preamp" wiring:

As just a gentle and friendly nudge to anyone the least bit curious about trying this. In my experience this "tweak" yielded the single biggest improvement in sound quality of any other tweak or adjustment to the ET2. All the other tweaks like using the correct spring compliance for mm or mc, magnesium arm wand and others which deal with resonance and which, to at least some degree, simply shift tonal balance around a bit which, in turn, may add to the impression of "improvement" in the context of a given system are not nearly as large in overall scope. The "sstp" wiring is a very significant improvement of a very fundamental nature with no downside that I ever experienced. Think about it: you are removing at least four solder joints and three connectors of different metals from the path of the tiny and fragile phono cartridge signal’s path. The increase in purity of sound, soundstaging detail and rhythmic coherence is huge in my experience. Of course the choice of wire is important, but secondary to the benefits of getting rid of all the "bumps in the road". The really committed (in more ways than one 😱) can always eliminate the connectors altogether and hardwire the wire directly to the circuit board of the preamp as I did.

Cheers.

I’m with you frogman. The first wiring in an analog system is that in the arm, and the most important to improve if need be. A whole industry popped up to cure the sub-standard Rega arm wiring, but a lot of other arms need it just as badly. A single, unbroken run from cartridge tags to RCA plugs is great, but some systems incur hum problems from the unshielded internal wiring being outside the arm. Some rewiring kits include shielding sleeves for the exposed wire, which often prevents any hum problem. The delicate internal wire is very fragile, and it doesn’t take much to break it off RCA jacks, or even the Cardas RCA block, so take care. I speak from experience!

Frogman, I can only second what you wrote! To hear the elimination of contacts or to compare different connectors under controlled listening tests has been my most educating experience in audio. I think the effect of contacts on sound quality are highly underrated. I guess that from the omnipresence of brass based "professional gold" contacts in a wide field of the audiophile market. Listen once, never return back.I was an anti-WBT low-budget "snob" :-) but the copper based WBT RCA connectors and the Clearaudio MPC were hugely better than any silver- or gold-plated brass connector back when I compared these (with ca. 7 identically constructed & oriented silver interconnects). Yo don't get what you haven't paid for - except for soldering directly!