Milimetr, I am currently using SF GH's; to drive them I am using a Jeff Rowland model 8 with choke and a CAT sig pre-amp. This combo works well because the G's are fairly inefficent and with tube pre-amp and a large ss amp they come alive. The G's seem to need at least 50+ watts in front of them. I have heard the G's with BAT amps at 50 watts/channel and they were just about able to drive the speakers although I could hear some strain. With 10W SET's, I suspect you will be overloading the amps most of the time. My room is pretty small and I can still get the amp pushed a little and we are talking 250 watts per channel! So, I suspect, that an ideal match in tubes would be in the order of 75 watts/channel minimum... something like the Tenor 75's or any of the bigger Jadis amps. Not as sweet as the SET Jadis 300's, but a much better match for the G's.
Sonus Faber Guarneri with SET amplifier -possible?
Hello,
is there any chance to drive new Sonus Faber Guarneri Memento with SET amplifier?
I think about something like Jadis SE300B.
It is 10 W per channel amplifier with two parallel 300B triodes at the output and oversized transformers.
It sound much more powerful than claimed 10 Watts.
I don’t like to listen very loud, don’t like to much of deep bass and have 2200 cu ft room (20’ x 15’).
The amp itself sound fabulous and I would like to get SF the best midrange possible.
Any ideas?
is there any chance to drive new Sonus Faber Guarneri Memento with SET amplifier?
I think about something like Jadis SE300B.
It is 10 W per channel amplifier with two parallel 300B triodes at the output and oversized transformers.
It sound much more powerful than claimed 10 Watts.
I don’t like to listen very loud, don’t like to much of deep bass and have 2200 cu ft room (20’ x 15’).
The amp itself sound fabulous and I would like to get SF the best midrange possible.
Any ideas?
- ...
- 14 posts total
I listen to the Guarneri's with a Unison Research Preludio 14 watt tube and they sound beautiful with individual piano , violin or guitar music. I then switch over to a Devialet 1000 watt SS for everything else. The 1000pro has complete control of the Guarneri,s whereby the preludio can just give you that sublime midrange. I guess we can't have everything. |
Sonus Faber Guarneri with SET amplifier -possible?Not if you want the best bass possible around 100hz. Because the SF’s have a 4ohm load combined with a -50 degree negative phase angle around that frequency, which the amp could see being as low as 2-3ohms. And with a SET is could sound a bit thin in this area. http://www.stereophile.com/images/archivesart/807SFGFIG1.jpg Cheers George |
SF Guarnier mememto, possible driving by power 300B SE These Memento’s, to me still not for a low powered 300B set, into that impedance and phase angle in the bass https://www.stereophile.com/images/archivesart/807SFGFIG1.jpg Cheers George |
- 14 posts total