2. home-theater
  3. 1148434774

Low-end Question

Setting up a little HT in my daughter's room. Have a small LCD TV with stereo speakers built-in, and an all-in-one HT/DVD to use for source.

Here's the rub - I don't have enough room to do the full 5.1 speaker thing, so I'd like to use the TV's built-in speakers. A few issues/questions:

1. Will stereo w/o sub or center still provide a reasonably ok experience? Don't need anything fancy, but also don't want sounds from the movies to be "missing".

2. the HT receiver has built-in speaker outputs (the cheapy spring-clip type, for L/C/R,Sub,RL,RR), but no L/R channel (RCA-type) audio outputs I can connect to the audio inputs on the TV. Is there any way to connect these two beasts?

Thanks!
joncourage
woodburger's avatar
woodburger
143 posts
 
The TV should feed the HT receiver, not the other way around. Do this. Use the TV speakers. Get a subwoofer. Tune it higher (frequency) than you normally would (probably as high as it will go), and put it reasonably close to the plane of the speakers n the TV. (Not up against it, just close).

You'll compensate for the lack of bass in your TV speakers.

It isn't ideal, but you can always build out from there.

Best regards,

Bob Wood
http://www.GreatHomeTheater.com
perkadin's avatar
perkadin
286 posts
 
Bob, what are you talking about? How is the TV supposed to feed the receiver when he's using the receiver as the source? Jon, if you want to use the TV's speakers it looks like you'll need a regular DVD player w/ RCA outs. DVD players go for as little as $30, so that's the simple/cheap route.

Otherwise get a pair of bookshelf speakers or a mini-monitor/powered sub combo that you can hook up to the all in one player. Pretty much anything you buy should be able to trounce the speakers that are built into the LCD screen.

You won't really miss too much info if you configure the all-in-one to stereo rather then 5.1 surround. Then it will read the 2.0 soundtrack on the DVD rather then the full one.
sugarbrie
3,854 posts
 
Onkyo's Integra Home Theater makes a DVD HT Receiver. Has progressive scan DVD and a 5.1 receiver in a very compact case. Model is DSR-7.3 Used ones appear on eBay.

http://www.gspr.com/integra/dsr73.html
.
arni
313 posts
 
Based on your description, it does not appear you can connect directly from the receiver out to the TV speakers. Your options would be to then just go straight from the HT/DVD tape out into the TV line in, bybassing really the HT component of the HT/DVD combo. The sound will be thin basic TV sound, not so exciting for movies.
Why not simply get a pair of bookshelfs with decent size woffer (6/12 inch) and place them at equal lengths from the TV.. that way its still simple, but with fuller sound.
More to discover