2. tech-talk
  3. 130275-16074

A New Ground -- Benefits of introducing the Synergistic Research Active Ground Block SE

Dedicated ground solutions are not a novel idea but over the past year it seems everyone has been coming out with their version. For a few months I’ve been thinking about introducing one to my system and had considered Entreq, Telos, Nordost and others. Although I have a bunch of Synergistic Research (SR) kit I had dismissed their older basic ground block as too rinky dink -- however when I heard about the new Active Ground Blocks I thought that could be the way to go. The Active Ground blocks are smallish devices with a mains connection and a plethora of outlets for grounding cables to every component. They incorporate a range of the latest SR UEF tweaks
http://www.synergisticresearch.com/isolation/ground-isolation/active-ground-block-se/

While the blocks alone are quite expensive ($2995) you will also need to lay out for connections to all of your components -- ideally the HD links. In my case as I have two distinct zones in my system I needed two ground blocks and 13 links -- quite an outlay

Question is is it worthwhile? Most certainly yes. The impact of implementing a full grounding solution in my system was one of the most profound changes I’ve experienced. It’s not a change that can be described in the usual audiophile terms of dynamics, frequency response, transparency etc. Instead it’s a shift in the wholeness, the verisimilitude, the gestalt of what you are hearing. Probably this is most obvious in a couple of places. Firstly is in background washes of sound (e.g. classic synth backings, or massed strings, or the whoosh that opens "Private Investigations") -- which now take on a scale, texture and clarity that had previously been completely masked. Secondly in vocals where a whole level of shading, nuance, breathwork, and subtly inflections are now audible. This is not simply more "detail" or a "reduction in the noise floor" it’s as if things which you did not know previously existed are suddenly there, as they had been all along

The effect is enhanced the more things you ground -- obviously all active components but even stands (my GPA stands are conductive so I connect a basic ground link to the bare metal inside the stand posts -- the surface metal is varnished and non conductive).

While I obviously can recommend the SR products I imagine any ground solution will bring similar benefits and would strongly suggest that anyone with a high resolution system explore some form of ground solution

ps For those in the now the music to accompany this review is A New Ground

128x128folkfreak
folkfreak's avatar
folkfreak OP
1,349 posts
 
Hi @68pete some thoughts based on your setup

one please make sure you are using the system as SR specify I.e, you should connect to an open/unused active outlet (RCA or XLR) and not to the provided grounding posts (other than in phono setups). Sounds like you are facile with a soldering iron so can connect some RCA jacks to the wires SR provide if needed. I’ve no idea why your amp manufacturer warned against doing this (likely they thought you meant using the RCA as a safety ground) - give it a try, worst it will do is nothing

secondly you must connect the ground from the block to the same spur (i.e. Pair of outlets) that is powering all the rest of your equipment. If you connect to a different spur it will sound thin and lifeless as you describe - my suspicion is that this is the root cause of your poor experience. Most setups have a power conditioner on one outlet to which all the equipment is connected and the ground takes the second outlet

finally the stock SR cables are absurdly sensitive to dressing. The need to be well off the floor, in loose loops (never kinked or coiled) - try lifting them up in your hands and you should hear the sound open. The HD cords are much less sensitive in this regard

if none of this helps given you have a straightforward system them the Gutwire type approach may be a better fit for you

good luck!
68pete
1,005 posts
 
Hello folkfreak
Thanks for the info. The dedicated ground hooks ups on my PreAmp and Disc player are designated for adding a outside ground . It even suggest it in the manual , that the sound may improve by doing this.  Both pieces are in the Esoteric line. My amp is on its on dedicated 20 amp line. the other pieces are on a 15 amp line that is feed by a High Fidelity MC-6 Hemisphere. So grounding every thing in the same plug is just not possible. I all so have 21 High Fidelity MC O5s plugged into the open socket of each line-total of 42. With 2  more plugged into the open sockets of the MC6 Hemisphere. I could remove 1 of the MC O5s from a socket on the Hemisphere and plug the grounding block into it. I may try that next week, but loosing the MC O5 from my system does not excite me. The MCO5s are the best upgrade or tweek on the market for the money.
enjoy Pete
folkfreak's avatar
folkfreak OP
1,349 posts
 
Ok on the dedicated grounds then on the Esoteric stuff. Do you have a duplex outlet connected to your 15 A line? The hemisphere should go in one of the two outlets, the ground in the other. The ground should not be connected to the hemisphere. Any other configuration just will not work and you would be better off sending the grounding block back for a refund


68pete
1,005 posts
 
folkfreak
Thanks for your honest report about maybe sending it back. I want to give it a little more time then i will make that call. It has gotten a little better with time.
thanks Pete
Post removed 
More to discover