Fuses fuses fuses


Ok, this is about fuses

1- a standard Bussman fuse is UL approved. Are any "high end" fuses UL approved?

2- do any component manufacturers supply their gear with any of the usual suspects of high end fuses as opposed to a standard Bussman?

3- let's say fuses do make a difference. Given incoming power is AC, why could fuses be directional? 

Not meaning to light any fires here- 

thanks in advance 
128x128zavato
georgehifi
"I talked with a software engineer who also had a masters degree in electrical engineering. He said, "Let me look at it.""

About an hour later he came to me and said, "I’ve found the problem, let me show you." He had found a 250 kHz signal modulated onto the power sine wave.
You said it all buckhorn_cortez

He as an engineer measured and he found.
There’s non of that going on here with the pro side of fuses can sound better, also when they are reversed.

Cheers George

Are you feeling a little groggy this morning, George? Of course engineers have measured fuses. Don't tell me you didn't get the memo. You can go back to sleep now.

Lee J. Cobb who played Juror #10 (the last holdout) was also great of course in On the Waterfront as mob boss Johnny Friendly. Also as Willy Loman in Death of a Salesman.

Of course engineers have measured fuses.

Not in the way you promote them, they wouldn't be stupid enough.

Cheers George

georgehifi
Of course engineers have measured fuses.

Not in the way you promote them, they wouldn’t be stupid enough.

Cheers George

>>>>>If you’re pretending to be dense you’re doing an excellent job. ( Juror #2 from 12 Angry Men)

Who do you think measured the directionality of fuses that are shown in the HiFi Tuning data sheets? Engineers. And they measured fuses in EXACTLY the way I promote them. I.e., conductivity is better in one direction than the other. Duh!