Has anyone tried these stunning new CPT power cord?


   Considering the many, many brands of power cords I've tried in my very well accomplished high-end system, I have never been so impacted by these Core Power Technology power cords. Within a very short period(15-20) minutes my system literally came alive. Soundstage opened wider and deeper. The background became dead silent, space between instruments and stage members were more focused and everything sounded cleaner and musical than ever. My highs had a glorious crispness and symbols shimmered. Midrange through my 2" horn became more dynamic and punchy. My 15" bass driver tightened and dug low with great control. My Rel G1 which is a fabulous sub on its own but with a CPT 150 on it is another story. Running high pass from my sub to my Audiozen Noah amplifier, music depth is just stunning. Lower end bass is authoritative and clean with solid grip and impact. 
   My experience with these power cords is truly magical. The scary part of the above is I only have one 150 on my sub and one 300 from my wall to my 6 outlet bar. I still need 3 more to complete my system. I could just imagine the level after that...In closing, I cannot emphasize enough to try one of these in your system. I CANNOT and WIIL NOT take these out as they are that good. But hold your jaw, cuz what you've been listening to will just become real after Core Power Technologies. 

Cheers....and let the tapping begin.......



128x128bacardi
The above comment 800 to much then go toUnderwood wally and see about buying a whole system unit 1200 or 1800 retail also watt size  and for sure get a few hundred off $$.
Then it becomes a great deal. No coolaid !!
Post removed 
Had burned in my 1200 for 300+ hours, and the listening experience is keep improving.  The initial improvement is the much quieter and darker background, with the veil removed!  I am having the same postivive experience with the previous posts about the 300-1800 models.  The most significant change for the post-300 hours is the expansion of soundstage, especially the width of the soundstage which translated into the separation of the vocals and instrument.  Another striking difference is the rebirth of the microdynamics that I missed a lot before.  The decay of notes seems keep hanging around the listening space. Every attack of strings really withhold my emotions! It brings out my vivid imagination when the air runs through the sax and clarinets.  Generally, I am much more engaging and enjoying the music.
I pair up the 1200 with the Furman conditioner, with the 1200 placed between the Furman conditioner and the source (CDP and preamp) which gives a synergistic effect. However, if I place the Furman between the 1200 and the source, it gives no satisfactory synergy.
I tried Furutech conditioner and Purepower regenerator.  Both of them need to be let go for now.  I am looking forward to see the synergy of mating the Deep Core (which may replace my Furman) with the 1200.

Thanks Mark for your product and your kind support!  
I own the 1800 model it is only 40lbs  it has a very substantial 1800 watt transformer  and wired out of phase neutral and ground all noise through ground.
I  tried several $6_1000 models  they helped some but restricted dynamics under 
Dynamic swings .The Core 1800 just sailed through and instruments had noticeably more dimension. 
Who has used  Cores power cords  ,the type that comes with the Big units like 1800. Aww 10 gauge Copper with Copper solid Copper end connectors ? 
Mark sells them straight up for $120 , or less when you buy a 1500,1800.
Pretty good improvement  vs Pangea 9 for similar monies the End male- IEC-plugs
For sure contributed to the sound. I HIGHLY RECOMMEND  the bedt signal enhancer on the market  Stabilant22, far better then Tweak which was a weak variant. First clean All contacts both sides with 99% Isopropyl alcohol.