@kalali : My turnaround time for the upgraded DIs in standard color was about three weeks from order to doorstep. FedEx was great and they actually wheeled each box in to my audio rooom. I don't think that is standard FedEx practice. :)
Tekton Double Impact & Comb Filtering
Like many of you, I have been pondering purchasing these speakers but am very curious about the unusual tweeter array. I asked the smartest speaker person that I know (he is a student of Sean Olive) about the design and below is what he had to say.
"In theory it could work, but the driver spacing means that the crossover point would need to be very low.
He is using the SB acoustics tweeter which is 72mm in diameter, center to center on the outside opposing drivers is around 5.7 inches, which is about 2400Hz. This means that combing would stop between 1/4 to 1/2 of the wavelength (between 1200-600Hz) is where the outside tweeters should start playing nice with each other.
Since he is not using low enough crossover points he has created a comb filtering monster. Now while it's not the great point source that was promised, it's no worse than most line arrays and the combing will average itself out given enough listening distance.
The MTM spacing on the other hand is ridiculous. Hopefully he is cutting the top end off on one of those midrange drivers to avoid combing."
"In theory it could work, but the driver spacing means that the crossover point would need to be very low.
He is using the SB acoustics tweeter which is 72mm in diameter, center to center on the outside opposing drivers is around 5.7 inches, which is about 2400Hz. This means that combing would stop between 1/4 to 1/2 of the wavelength (between 1200-600Hz) is where the outside tweeters should start playing nice with each other.
Since he is not using low enough crossover points he has created a comb filtering monster. Now while it's not the great point source that was promised, it's no worse than most line arrays and the combing will average itself out given enough listening distance.
The MTM spacing on the other hand is ridiculous. Hopefully he is cutting the top end off on one of those midrange drivers to avoid combing."
- ...
- 362 posts total
@onhwy61 : The upgrades offered are listed at the tail end of the Specifications Section on the Double Impact page. There is a link at the end of the upgrade descriptor that will take you to this page: http://www.tektondesign.com/upgrades.html In short:
|
kalali, When I purchased my pair they had a set on their specials page that were ready to ship the same day.I got a upgraded black metallic paint finish,they were reduced slightly because of 2 super tiny flaws in the paint,you have to be within 6 inches to see them.I understand from others that the average wait is 3 to 4 weeks including shipping time,but that may vary depending on finish ordered. Onhwy61, The upgrades are explained in detail if you view the double impact speaker from the drop down that is located in the full tower section. Now I know Tekton doesn't have the best website and needs more info maybe that will get better in time. Kenny. |
- 362 posts total