SME Tonearm Question

Thanks for the suggestions.  
While this type of cable is not very common I have found several options.
This one comes highly recommended on another forum:
http://audiosensibility.com/blog/products-2/phono-cables-occ-copper-and-occ-silver/#!/Impact-SE-Angl...

I can't find anything about this cable that makes me think it won't work with the SME tonearm, can you?  They offer the DIN configuration in Jelco and Standard.  I believe the SME would be standard configuration.  

It's a tight fit in there.  So some din connectors won't fit or the orientation is not correct.  When I had a SME 20 I used a Hovland Phono cable and it had a Cardas DIN.

The folks at Kimber can easily make you a tonearm Cable for the SME 4.5.  Note the that the standard cable configuration makes the cable end come out at a horizontal plane to the table, it need be oriented at either 3 or 9 o'clock (cannot remember, will update once I check my files)  to make the cable protrude downwards.  Graham tonearms are opposite to get the cable to exit downwards.

Best of Luck

Peter

I am pleased with the Audio Sensibility balanced cable. Call and speak with Stephen Huang directly and he will give you a precise answer.

I did order the Audio Sensibility cable, arriving this week.  
Thanks again for the help!