OK all you Infinity RS 1A/1B Beta speaker owners..


.......everyone tells me to bypass the active crossover and drive my mid-range/tweeter towers directly rather then having the pre-amp conected to the crossover. Can someone tell me the step by step procedure on how this is done?
Also, are there any other mod's to the "active" servo crossover???

Thanks again for all your support and help!
rwd
Dump the infinity crossover and use a Bryston 10B full range crossover. The difference is outstanding. If you decide to go this way just me know and I will give you my preferred crossover and gain points.
Hi Mrgolf....how is this done???? Don't you need the infinity crossover for the servo control for the woofers???
I have received some great comments and suggestions (Thanks Mark!!) about a new crossover for my Infinity RS 1-B's. It seems that replacing the servo crossover with another crossover, like the Bryston 10B, is a smart move. Many people say the infinity unit is the weak spot in this system! My question is....has anyone used another crossover besides the Bryston??? I have heard that the Merchand crossovers are also quite good? Any comments???

Thanks all
Rick...(and thanks again Mark).
impossible if by pass, because RS 1b no build passive x-over crossover in LF column. If you can get one's on the market 20hz-400hz max 1200w hopefully it work.
Hi you must use the crossover the bass is servo controled by it and the input impedence puts the proper capacitors in series so the mid/high towers crossover at the proper crossover frequency.This is because the mid/high towers have a passive crossover.If yours does not work or you need one I have them for the RS1b system they are 500.00. but they make all the difference in the world.Hope this helps.