I like these if you can afford about $80 / pair USD plus shipping. https://www.takefiveaudio.com/products/1358-mogami-2549-gold-performance-rca-deep-cryo-treated/ I also have the same Mogami 2549 wire with KLEI Copper Harmony RCA terminators. |
@213runnin - I don't necessary agree that all interconnects in a system need to be solid core. Granted, that would be the best solution, but even just having one solid core is better than nothing. I would recommend this at the last point before the amplifier to "drive" the final sonic signature of cable charge/discharge characteristics. Another comment. Some of these interconnects use a much larger 18awg solid-core conductor (such as Signal Cable or Beldon 1694 from Blue Jean). I have done a lot of R&D with solid core and have found that when conductors are larger than 20awg, then you start losing high frequency detail and clarity. The larger-core conductors would be very good for a subwoofer cable as the larger solid-core awg will convey much more power in bass notes. However, it's a fine line. I found 20awg to be the best all around. With 22awg and smaller, it will still work, but you start losing bass/midbass impact. |
Thanks for the thoughts guys! People love Signal cable. @lalitk to answer your question - I'm not really solving for anything in particular, just futzing. My speaker wire is 12 AWG Auvio brand I got on deep discount from a closing RadioShack. It was a noticeable improvement when I got it. And the Kablediretk ICs were a noticeable improvement from whatever crap wires I had laying around. So... I guess I'd just have to try something new out! |
