2. cables
  3. 128927-305

Most Important, Unloved Cable...

Ethernet. I used to say the power cord was the most unloved, but important cable. Now, I update that assessment to the Ethernet cable. Review work forthcoming. 

I can't wait to invite my newer friend who is an engineer who was involved with the construction of Fermilab, the National Accelerator Lab, to hear this! Previously he was an overt mocker; no longer. He decided to try comparing cables and had his mind changed. That's not uncommon, as many of you former skeptics know. :)

I had my biggest doubts about the Ethernet cable. But, I was wrong - SO wrong! I'm so happy I made the decision years ago that I would try things rather than simply flip a coin mentally and decide without experience. It has made all the difference in quality of systems and my enjoyment of them. Reminder; I settled the matter of efficacy of cables years before becoming a reviewer and with my own money, so my enthusiasm for them does not spring from reviewing. Reviewing has allowed me to more fully explore their potential.  

I find fascinating the cognitive dissonance that exists between the skeptical mind in regard to cables and the real world results which can be obtained with them. I'm still shaking my head at this result... profoundly unexpected results way beyond expectation. Anyone who would need an ABX for this should exit the hobby and take up gun shooting, because your hearing would be for crap.  
douglas_schroeder
jinjuku's avatar
jinjuku
226 posts
 
Empirical evidence is obviously what Geoff says it is. I can't wait for his rebuttal video where he, without realizing it, refers to himself in the 1st person. 
shadorne's avatar
Ag insider logo xs@2x
shadorne
7,477 posts
 
I can see how a different cable could make a difference but ONLY with crap equipment. Just consider that there are electrical signals coming in and going out through the ethernet port.

If your audio device is crap then presumably the simple act of receiving a burst of signal or transmitting a burst of signal on the ethernet port may disrupt or add noise to the analog output. (Like transformer hum 60Hz power supply noise that somehow makes it to the analog out)

For such a crap device, perhaps a different cable will be less noisy who knows... it is hard to conclude anything with such poorly designed and constructed equipment. 

The key is to understand that properly designed equipment will ensure that ethernet communications are totally isolated from the analog output. This is a MAJOR design requirement for a good DAC - just like channel separation, THD+N and other specifications - a GOOD design isolates everything that is not audio (power supply, physical vibration, remote control interface etc) from contaminating the analog output.


jinjuku's avatar
jinjuku
226 posts
 
If your audio device is crap then presumably the simple act of receiving a burst of signal or transmitting a burst of signal on the ethernet port may disrupt or add noise to the analog output. (Like transformer hum 60Hz power supply noise that somehow makes it to the analog out)

I don't see, nor have seen any credible hypothesis promoted, how a $700 cable with 8 metal conductors and shield (either floated, full/partial tied) would mitigate this noise vs another like built, 8 metal conductors and shield (either floated, full/partial tied) where they both pass what the standards body deems as in spec. 

Archimago's glimpse into this bears this out. Even with a 50' cable.

I went extreme and used 315 feet. 

This whole 'directionality', 'crystal grain boundaries', for Ethernet is BS. 99.99999% of the connections the global Internet runs on (where the connections are not fiber) are going to be ETP copper, CCA, or something else.

What it isn't going be is 'directional copper'. 
jinjuku's avatar
jinjuku
226 posts
 
Here is the basic sentiment that is conveyed where subjectivists make claims about either people or their setups (both they’ve never experienced, which is what I willing to do):

I heard from three spoon benders that they can bend spoons. Why wouldn’t you trust the spoon benders that said they can bend spoons?

If you can’t bend spoons it’s because either you or your spoons suck.

shadorne's avatar
Ag insider logo xs@2x
shadorne
7,477 posts
 
@jinjuku    

"I don't see, nor have seen any credible hypothesis promoted, how a $700 cable with 8 metal conductors and shield (either floated, full/partial tied) would mitigate this noise vs another like built, 8 metal conductors and shield (either floated, full/partial tied) where they both pass what the standards body deems as in spec. "

Agreed. However if you accept that equipment is badly designed and faulty (contamination from TCP/IP communication is reaching the analog out) then a mere change of cable might influence things in an unpredictable manner. 

I am convinced that some anecdotal reports are pure placebo (result of parting with $700) effect but many others are actual equipment issues that happen to be identified or brought to a users attention when swapping out cables.

Do not underestimate the amount of badly built equipment out there. Manufacturers read the latest DAC chip instruction manual and throw a DAC together with a gorgeous looking faceplate and there you go. Analog audio designers are often challenged when faced with advanced digital circuitry, ethernet, USB, firmware etc. - the possibilities for overlooking error and contamination sources multiply in digital.




 
More to discover