Just retired and want to get back to vinyl listening


I'm reeducating myself.... after years of no TT and focusing on just stereo listening.. I had a some early Klipsch Hersey’s and some GENESIS speakers pair with Yamaha receiver and low end turntable 30-40 years ago -- I can afford a higher end setup this days -- so what are thoughts on pairing a luxman l-550axII with Klipsch cornwalls?

I like the Herseys for music in the day.. cornwalls seem to be larger herseys but may well need audtion some of the tower types folks seem to tout..

I still thinking on TT -- but may get a VPI scout or prime -- thinking through the cartridge choices and other things is still a serious education -- recc?

music taster are varied -- jazz to singer vocalist miles davis - linda Ronstadt and a host of others for vocal musics and instruments- soft rock of the 70-80s- to some classical

thoughts -- looking to 15-20K for the refit for stereo listening - but could stretch some if I like the setup

steventoney
thanks fson -- I will give the 0/93s a good listen before I move -- If I decide on Devore I may need to have the dealer I’m getting my local in house audtions and reeducation from a nod to selling me the speakers as there will be no dealer anywhere close to me in Spokane.. btw how picky on placement do you find the 0/93s -- how far out from the wall -- how far apart - anything between

I have decided to buy the TT from them as a starter and then can work with them if still needed after the move on speakers.. They are going to take me through setting up the TT and adjusting - measuring things on the concept TT and will use it for more next demo’s in their shop of the devore speakers -- I not that interest in the other speakers they have in house... I’ll basically rebox the TT in the shop with them and haul it with me in my yukon versus having with the stuff handled by the moving company.

I also will be visiting one other dealer here in VA - further away to listen to harbeth and audio note speakers -- I do wish to hear for my legacy memory a set of Klipsch Hersey-Cornwalls just to hear them and have a old memory comparative -- I plan to try to list to a KEF Ref5 and Sonus Faber Olympica IIIs if possible -- maybe legacy audio focus SE -- on a trip to the western WA area shops after I move and settle in spokane - it would roughly be a 3-4 days round trip to get out there and hit some shops in a 2-3 day time frame with the rest being travel time

pretty much decided on the luxman integrated and will buy they after move and paying for the move and getting new bed, etc in new place in spokane - probably a early christmas present for myself --
btw how picky on placement do you find the 0/93s -- how far out from the wall -- how far apart - anything between
I had an educated guess where they needed to be and think I am very close with no fine adjustment yet. I read John's "Care and Feeding" instructions and he ascribes to the rough equilateral triangle configuration with two options depending upon whether you set them along the long wall or short wall. Mine are five feet from the front wall, three from the sidewall, seven feet woofer to woofer centers, seven feet from my head in my listening chair, and toed in so that I barely see the sides of the enclosures. So my short answer is "not picky at all".
On the TT, my advice is to have the dealer set it up, buy a good digital tracking force gauge and level, and be sure to check VTF and for levelness when you arrive home. VTF is likely to change during transport. When I got back into vinyl about a dozen years ago, I felt compelled to tinker with alignment and VTA and azimuth rather than sitting back and relaxing and trusting that my dealer had aligned the cartridge and set up the table properly. That was a mistake. The problem with most TT's is that the basics of TT set-up are fairly easy but the the TT manufacturers don't make it very easy to actually perform the adjustments. I have owned two VPI tables and five different VPI armwands and though I love VPI, I don't like the tiny allen key screws that are prone to stripping with the least bit of over-tightening and the awkward location of those set screws. At 58, the most annoying thing is not being able to see what's going on without a pair of readers on and a flashlight in one hand with an allen key in the other while craning to see what's going on towards the back of the table against the wall. I tend to disassemble platter from table and tonearm from pivot point and transfer the whole mess to my kitchen table under bright lights :-) Don't let a bit of this cause you pause-the pain is worth it. 
@steventoney 

So you are in WA.?
You may wan to look up Chapman Audio. Stuart Chapman Jones and family are on Vashon Island, in the sound, and have been making top notch speakers for decades. He is very friendly and will have you for a visit in the listening facility.. 
Also, a trip to Ferndale, to visit Lou with Daedalus Audio would be top on my list, as well, for speakers in your area. Lou is one of the friendliest in the business. Both are very very good and you get more performance than you pay for going direct with these two.

But I do also love Devore and am personally looking forward to hearing the Gibbon X again... 

will be in WA -- Spokane.. moving van comes 2 weeks from day -- I drive away a day or two later after check out of the apartment -- 2500 miles to Spokane -- probably more with side trips along the way..

thanks for the input ---  the Daedalus speakers are pretty things -- what is their sound compared to the Devore Gibbon X??