2. analog
  3. 131623-85507

Vibration Issues / Turntable Decisions

Currently have a Thorens TB-150 which is upgraded to about the fullest extent (Cardas Wiring, New Walnut Plinth, MusicHall Cruise Control 2.0, Rega RB220 Arm, Ortofon 2M Bronze). With that being said, my table is plagued with skips if you all but tip-toe in the room. One of those things that just gets on my nerves. So I have been looking around for a mass-loaded TT.

Is changing to a ClearAudio Performance or MusicHall 9.3 really going to make a different in the skipping?
Any feedback on the Goldring Eroica LX Cart?
Are there any tables to be looking at?

Thanks!

-Ron
hifiron
audiopoint
208 posts
 
Hello Ron,

A few questions on the rack build since that is the obvious issue causing the footfall.

How is the rack touching the flooring and are there any types of footers between the frame bottom and floor?

Is the rack inside the framework hollow or is there any type of bracing?

Is the frame 'X' braced? 

Based on these answers, there could be a solution that will also improve performance of the system entirety.

Robert
Star Sound


inna
7,923 posts
 
I would also check the tracking force, just in case.


geoffkait's avatar
geoffkait
23,365 posts
 
Ditch the stand. Stands and racks are bad news.

roxy54's avatar
roxy54
8,171 posts
 

Ditch the stand. Stands and racks are bad news.

You know Geoff, I don't mean to be unkind, but I realize now that you are one of those people (there are others) whose job it is to take a position whether it makes sense or not. I guess I would call it being contrary.

You of all people, who espouses and even sells different gadgets for isolating/decoupling now makes a blanket comment that stands and racks are bad news. I think that most people who have used one have heard their benefits. I suppose you just enjoy arguing about nonsense.

slaw's avatar
slaw
22,861 posts
 
There are other threads about this very issue you may want to research.

The least expensive and maybe most effective option would be to use springs / www.grainger.com rated for your TT’s weight. Using springs will require the need to adjust your TT for level.

So a couple of MDF boards with some sort of footer or shims between the bottom board and your current console that allows for level adjustment, the springs between the two boards and your TT on top.

This will be very beneficial without messing up your walls, all the while, giving you a taste of the benefits of what good isolation can accomplish for the future.

Your other components would benefit from this as well.
More to discover