2. amps-preamps
  3. 131753-4121

PLEASE match Advice Pass Labs X350.5 (20k) to Hovland HP-100 (2500ohms) Miss-match ???

GUYS / GALS NEED YOUR HELP PLEASE!

A friend said this preamp is outstanding and will sound great with Pass Labs amps and to not get caught up in the specs but the measurements say different.

Pass Labs X350.5 amplifier with input Impedance 30k ohms Balanced or 20k ohms Single ended* 
(*source Pass Labs Manual)  

Hovland HP-100 source impedance 2500ohms* 
(*source Stereophile) 

Guys / Gals, can I used my Pass Labs X350.5 amp with Hovland HP-100 preamp? Has anyone used Pass amps with Hovland pre's. I will be using Magico S5 Speakers and Bricasti M1SE DAC but want it to sound the best it can. Should I just stick with the Aesthetix Calypso pre I was leaning toward before my gut said to go for the Hovland HP-100

Hovland HP-100 Preamplifier: * Output impedance: approximately 2500 ohms or according to Atkinson, Hovland HP-100 (2500ohms) its source impedance was high at 2.4k ohms, rising to 4.3k ohms at 20Hz. The partnering power amplifier would best have an input impedance of at least 47k ohms if the bass is not to sound lean*. The Pass Labs doesn't meet the x10 requirement it is supposed to but it is sort of close when looking at it. What do you guys think? I am not sure what to do but you guys will know what to do?

Stereophile: Its input impedance was a usefully high 100k ohms in the midrange and bass, with just a small reduction to a still-high 86k ohms at 20kHz. Despite the claim that the HP-100 uses a cathode follower output stage, its source impedance was high at 2.4k ohms, rising to 4.3k ohms at 20Hz. The partnering power amplifier would best have an input impedance of at least 47k ohms if the bass is not to sound lean.

Read more at https://www.stereophile.com/content/hovland-hp-100-preamplifier-measurements#YZXZfGLbbL2COkLR.99 https://www.stereophile.com/content/hovland-hp-100-preamplifier-measurements#YZXZfGLbbL2COkLR.99
128x128Ag insider logo xs@2xfsmithjack
fsmithjack's avatar
Ag insider logo xs@2x
fsmithjack OP
712 posts
 
Oops guys just got back me. 
Ayre K-1xe for $150 more than the ARC -

i head these are great - long in the tooth but great - really want the one out of these that is the best but also match impeidamce wise and will match my Pass amp best and work with Magico S5's - so I can swing any these price wise?
fsmithjack's avatar
Ag insider logo xs@2x
fsmithjack OP
712 posts
 
The Pass XP-10 pre and Ayre K-5xeMP are only 2/3 the price of the others if that helps at all. 
dlcockrum's avatar
dlcockrum
2,190 posts
 
My vote goes to the K-1xe but I am biased by years of ownership. Could be a lifetime buy.

Dave

Post removed 
fsmithjack's avatar
Ag insider logo xs@2x
fsmithjack OP
712 posts
 
I know I love tubes but want the best matching pre but also the very best pre for the money. I just had a nice fellow offer me a nice deal on a Ayre K-1xe but
at a better price. Quite a bit less than the tube amps and only $300 more than these
Pass Labs XP-10
Ayre K-5xeMP

Looks like  Ayre K-1xe will be my pre of choice to go with Pass Labs X350.5. Really wanted to get some tubes in there but from and this is an older pre but from what i have heard it is an excellent and very non solid state sounding from a clinical or flat standpoint. What do you guys think. 

That's funny it started with either a Hovland or Aesthetix or BAT but evolved toward a Ayre K-1xe. 
More to discover