Stillpoints Ultra 5


Will the Stillpoints Ultra 5 be a better choice than the Alto-Extremo Lyd 2 for my Evolution Acoustics MM3s over wood floor?
Currently, I’m using Herbie’s Giant Cone/Spike Decoupling Gliders (Titanium).
128x128leog2015
Wolfie might have a point (cough, cough) here since the Vibrapods act like springs. Like air springs. You know, to decouple the speakers and prevent mechanical feedback. Don’t knock it if you haven’t tried it.



sometimes you feel like a 'couple' sometimes you feel like a 'de-cuopling'.

Different situations, different solutions.

just the building’s own architecture can shove one down this path or another. second story floors, floors without significant support direct ot the foundation have different problems to address.

there are tons of things to try out. thankfully. or regretably.

these [things are ones I keep hearing about in various articles so I am interested.

not having actually seen them, would someone care to describe then and their intended purpose or why their maker says these are the end all in resonance attenuation?

Are these the NOrdost points?

Footers? spikes? For use with speakers, racks, stands, or with components?

thanks.?

Sometimes I feel like Francis Ford Coppola, sometimes I don’t. If your goal is reducing mechanical feedback you better feel like decoupling since coupling insures mechanical feedback. You can also employ damping or some sort of energy dissipation along with the decoupling. On the other hand if you’ve already isolated the electronics, go ahead, couple at will. If you decide to go the cones route be sure to choose those NASA grade ceramics since they couple the best. You know, due to their superior hardness, much harder than steel or brass or aluminum or whatever.

Inna…Vibrapods do pretty much exactly what other, much more expensive isolation products do…turn vibration into heat. If you touch the floor next to my main speakers when relatively loud music is blowing through them you will feel ZERO vibration from the speakers into the floor, and thus should be able to understand that nothing much from the floor is being transferred up into the speaker boxes. This improved the tonal coherence of the speakers and works beautifully in my system. I've had these under my speakers for years and have noticed in that time a movement in home audio toward what you describe as "rubber" isolation products surrounded by fancy metal casings or whatever, which are designed to accomplish what my 'pods do so well…they're just not expensive enough to lure some into using them, which isn't all that unusual in this hobby.