The best amp or improvement for Dahlquist DQ-10's


I have been looking at and listening to many speakers but every time I come home to my DQ-10's I still enjoy them most. Their flaw, and the reason I'm looking, is the bass driver and/or the bass enclosure. The sound is not "tight" or "punchy" enough. I've read that this can be alleviated with certain amps. (Although I am skeptical). I've even contemplated changing the bass driver and bass enclosure.

MY QUESTIONS: Is there a speaker out that has the same mid's and high's but with "tight" bass? Is there an amp that really could tighten this "loose" bass? (No suggestions over 2k used market).

SETUP: I have a Rega Planet cd player and Rega 25 turntable feeding an Audible Illlusions 3A pre-amp with Amperex gold pin 6922's going into a Rotel 980BX 100 watt per channel amp.

ALL HELP APPRECIATED - THANKS
imin2u
Everyone has offered some fine advice so far excepting one very effective modification which will cost you much less money than a new amplifier and at the same time dramatically improve your overall sound. Get your self a second pair of DQ-10's and stack them one atop the other (4 lengths of 3/4" square aluminum tubing works perfectly as a frame). Wire the speakers in parallel (4 ohm load) and your amplifier should double (or nearly so) it's output wattage. 200 watts into stacked Dq-10's is SPECTACULAR! I have been listening to mine that way for over 10 years. Hope this reaches you in time.

Al B.
I own the Dahlquist 20I speakers and have mated them with Legend Audio Design monoblock amps. They are above your $2,000 mark, but they also have an integrated for much less, although I can't remember how much it is. There is plenty of bass for my tastes. I personally don't like booming bass, it overpowers the rest of the music. It took me a long time to find the right amps and I think my speaker/amp combination sounds phenominal. It is very detailed, dynamic, yet silky smooth. I have also listened to the McIntosh tube amps (not solid state) and they sound very nice also. You might also try Rogue.
I use a Mission 772 power amp to drive my DQ10's. This amp is old and uncommon here in England. It's quoted at 150W continuous per channel.It also drives a pair of Radford 360 degree things about which I know nothing. Marvellous. The next plan is to use an LP1 and drive a 1W or two 1W's with a Naim NAP90. Don't know whether this will work or how towire it all up. Any comments/advice?
I am new here, in fact by screen does not work let. That is new. In time I will figuer this site out but at this point I am loss. But anyone that can help me with this question please take the time to E-mail me at cudaken3834@aol.com

I have a pair of DQ 10's and love the sound, but the amp will not handle them. I have a ADCOM GFA1A, and drive it in to shut down fast. Will the ADCOM 555 or 555II handle the DQ 10's?

I am not the purest I use to be. In fact the system has not be fired up for 8 year's. But the bug has bite again. Donot want to make a second mistake in power supply.

On a tight budget, as screen name will tell you I am in to cars as well. Knee deep in a blowen 69 Charger so used is all I can afford, $400.00 max. So no crown aps's for me.

Will someone please take the time to answer me by E-mail? Make subject DQ 10'S in uppper caseing. E-mail again.

cudaken3834@aol.com

Thank you for your time.

Cuda Ken
I was about to get rid of my DQ10s for some Maggies. But they were sold. However, the guy had a modded ARC D90B and SP8 and he assured me that I have never heard what the DQ10 can really do. He talkrd me in to it and it was the best combination I have ever heard with the possible exception of the original Ampzilla II and Thaedra by the GAS company. But these are next to impossible to find. Because of their jFETs they sounf like tube amps but have the power of solid state. I only paid about $2000 for the used RAC equipment but I think your preamp is fine.