Well, I took the plunge an ordered 5 Blue to replace my SR Blacks.
Gotta find out what all the fuss is about.
ozzy
Gotta find out what all the fuss is about.
ozzy
The new Synergistic Research BLUE fuses ....
imgoodwithtools I need a fuse cooker. Why don’t y’all fully break in these fuses, mark proper orientation, then send them to me for analysis. ; >>>>>Most likely because it takes so much time and energy and tube life. 😬 Direction can be determined very easily by reversing the fuse by the customer. Even when fuses are marked the customer has to reverse them anyway. 😳 Besides some fuses are made only when ordered (e.g., Audio Magic Beeswax fuse) so the customer probably would prefer not to wait 10 extra days for his fuse. |
Again, I want to reiterate that the Blue fuse sounds excellent without being broken in, better than black fuses with 300+ hours. At 2.5 hours to date, they sounded 90% of what they can be after 25 more hours. I detect fuller tonal palette, more dynamics, more solid highs and lows-just a little better all around. There's just a little more musical involvement as they break-in. I am extremely happy with the new blue fuses, particularly because they sound great on initial insertion. I would not cook my tube equipment for 125 hours for an Audio Magic fuse even if it is better, especially if the sound is degraded as was the black fuse from 10 to 65 hours of initial use. |
For a means of constructing a DIY fuse cooker see the posts by Nonoise, me, and Dlcockrum dated 10-22-2017 in the Padis vs. Furutech fuse thread: https://forum.audiogon.com/discussions/padis-vs-furutech-fuses?page=2 Regards, -- Al |