2. tech-talk
  3. 132207-1294

Speaker Cable Banana Plug Breakage

Hi Folks,
I could seriously use some help with a banana plug issue. The thin gold plated pieces that splay apart on the end of my banana plug have broken off and now, I'm having some conductivity issues. I used a test CD and there is obviously a reason for concern. These are older Hi Diamond speaker cables and while they sound wonderful, the build quality might leave a little to be desired. Right now, the banana plug end is a minuscule gold pointed spear and I'wondering if there isn't something that I could do without causing a sound contrast between the two speakers? I'm pretty certain that Cullen Cables can help me with his issue but I need to buy myself some time before having them properly repaired. Any help would be greatly appreciated,
Thanks!
128x128goofyfoot
perfectpathtech's avatar
perfectpathtech
236 posts
 
goofyfoot

Your gut instincts were correct, while just about anyone can solder, making a high quality audio solder connection or even a mechanical one
takes some practice, and despite what others may say there is a white paper available about the whole bare wire vs a high quality termination.

The point of my response is when your ready
to have them fixed it, I would be willing to re-terminate them for you
for free, soldered or mechanical connection. If soldered I use Cardas.
Sounds like you really like them, I wouldn't mind helping out a fellow member! 
perfectpathtech's avatar
perfectpathtech
236 posts
 
I just saw your thinking of putting on really cheap connections, that will affect the sound !! For the caliber of cable your using, you definitely want a banana that uses pure copper or silver, the ones your looking at are brass at best.
goofyfoot's avatar
goofyfoot OP
1,384 posts
 
perfectpathtech, that's very kind of you and yes, I would like Cardas plugs. According to HiDiamond, I should be able to replace the plugs myself. For the meantime, I will place the bare wire (without touching it) to the post and then work towards getting two sets for both ends of each cable. If I'm going to replace one end of the cable, I might as well do the other end.
toddverrone's avatar
toddverrone
840 posts
 
Those nerve audio BFA banana plugs I linked to are beryllium copper with a silver plating. I use them on the speaker cables I make and they sound great. The monoprice banana I’d stay away from, they’re certainly brass.

@perfectpathtech - you are a sweet human. And yes, there is technique to making a good connection. But the man sounds like he’s good with his hands and could definitely do it himself. Plus, the stock connectors are held in place with set screws, it sounds like. As long as he buys connectors made from good materials, it’s very likely they’ll be as least as good as stock. I never like set screws as a way to attach connectors. But heck, if I were him I’d take you up on your offer as well!
goofyfoot's avatar
goofyfoot OP
1,384 posts
 
The response from HiDiamond;
'removing banana is really simple.

turn and unscrew the silver ring, will see two screws, I have to unlock them and then lift the broken banana and insert a new banana that you can buy via internet in USA Shop or yes is possible use bare wire . the important thing is not to contact the other terminal'

More to discover