Amplification for Wilson Audio Sasha on the cheap

Thanks for all the recommendations, the reason I ask the question was to know what everyone has tried.

I currently have a ME850 amp which I used to use with my ATC SCM40’s.
With the Sasha’s they seem to not require much volume pot to get to reference levels telling me they are more efficient than the STC’s but I also want to ensure their output profile is sufficient for the Sasha’s.

Check the link for the specs and advise what you think.

http://www.me-au.com/me850data2.jpg

I've been driving my Watt/ Puppies with Krell for years.  First with a KAV 500, then with FPB 750 monos.  I think it's tough to beat the Wilson/ Krell combo!

I currently have a ME850 amp

I own 2 of these amps active bi-amped, and I can say one will drive the Sasha’s without even yawning.
If you need to sweeten it a little get a tech to bias it up a little more from 8w Class-A to around 12-15w, fan are speed controlled according to heatsink temperature, but this is still dead quiet unless you put your ear up to the intake vents.

http://www.me-au.com/me850data1.jpg

Cheers George

Thanks George, I need to get it serviced at some stage and might look at the bias adjustment then.

The Sasha is easy to drive and if you like tubes, most any 100 watt tube amp will do the job with plenty of bass despite the low impedance at 80Hz.