Power supply AC cords: any reason to upgrade?

@mulveling   Thanks for all the suggestions. I've done the Magnum upgrade. 

What is the benefit of the (additional?) SUT? According to Rogue's website, the Magnum upgrade includes "Cinemag blue label step up transformers." Is this all in search of additional gain? My cart is a Rega Apheta II and I get plenty of volume out of it with the Ares set to its specs.

@williewonka : I'm using some DIY power cords at the moment. They're made w/DH Labs "Power Plus Reference" 12 AWG cable and Marinco plugs. All the runs are 2' or less. I had to pull one of them out to do some other work and got to wondering if wrangling all these firehose-size cords is worth the trouble for a device that takes everything to DC anyway. The power supplies are 2 Keces, one 24vAC unit whose manufacturer I can't remember, and the Rogue Ares' OEM. They're all pretty solidly built with heavy metal cases.

how low is the inter-winding capacitance on the transformers inside your power supplies?

@john_g
No, you wouldn’t want to stack an internal & external SUT. Rather, you’d bypass the internal SUT (i.e. run in MM mode) in favor of the external SUT. Of course this only makes sense if the external SUT is of higher quality than the internal -- and enough of a difference to overcome the extra interconnect and noise pickup potential.

BTW I've accidentally stacked an internal & external SUT and the result was actually too little gain. The 2nd SUT presents a very heavy load to cartridge, and you lose most of the cartridge's signal before it even hits the 1st SUT.

The blue Cinemag they put in the Ares Magnum is a 1254. It is excellent, though there are some incremental improvements to be had with a Bob’s Devices Sky CineMag and excellent cable -- but it’s not nearly as big as the 1st jump from a red 3440 to the blue 1254 or 1131. Since your Ares is Magnum’d you’re sitting pretty good there.

@john_g - since you are experience with DIY you could try the HELIX power cord detailed on my web site....

http://image99.net/blog/files/be8de0c383c5434907610d6b55049e69-75.html

They may seem a little daunting at first but they are actually pretty easy to make and outperform most other PC’s I have tries (some up to $1500)

I would use the following
- a 16 gauge conductor for the hot conductor
- two 16 gauge conductors for the neutral
- a 16 gauge conductor for the ground

Keep the same quality of conductor as identified on the site from Take Five Audio - they are great quality

Using lighter conductors makes it much easier to wind the helix coils

My system currently uses a mix of 10 gauge for mains and power distribution and 13 gauge for source components and sounds amazing

I also have a mini system that uses a 16 gauge version and it is outstanding.

Let me know if you have any questions

Steve

randy-11 I don't know the inter-winding capacitance of the transformers.

williewonka Thanks for the link. I might try this.