Sub Integration

Thanks wtf,
My system isn't quite the same as yours. I have two 10" Klipsch subs but one is sealed and one is front ported. That's why I considered plugging the ported one to bring the two closer in performance. Yes, I am using the ICBM in stereo subs mode. ICBM manual suggests setting the crossover on the subs to their highest setting and then select the actual crossover point on the ICBM. I assume this is the correct way to incorporate the unit with the subs? Thanks again for your suggestions.

ICBM manual suggests setting the crossover on the subs to their highest setting and then select the actual crossover point on the ICBM. I assume this is the correct way to incorporate the unit with the subs?

Exactly. I also set the volume on the subs to the same level (half way on mine).  And if I wasn't clear, set your ICBM-1 crossover to 60Hz and use the the ICBM-1 "subwoofer level" to dial it in. As mentioned above, mine is always between minimum and the center line on the ICBM-1. You'll know quickly when it gets boomy. Best of luck.

Note that properly utilized subs add far more to your sound than simply bass tone, as the overall "feel" of a system can improve dramatically with the addition of what has been called "charging" of the room with a good sub or two. Everything sounds better as you’re getting the reality of musical low frequency that is part of life (how profound…I think I’m gonna weep), even if you're listening to only mandolins. Also, if you add the sub at the -6db point you’re going to have a gap in the output of the actual music…not recommended, as nobody should recommend anything other than messing around with placement and level until you’re happy as a clam in the sand. Proper sub level is absolutely relative to the main speakers it’s blending with, and the sound of what’s being played…sometimes requiring adjustment which I do by turning the subs up or down a little or using my previously mentioned Schiit Loki.