The new Synergistic Research BLUE fuses ....


New SR BLUE fuse thread ...

I’ve replaced all 5 of the SR BLACK fuses in my system with the new SR BLUE fuses. Cold, out of the box, the BLUE fuses stomped the fully broken-in SR BLACKS in a big way. As good as the SR BLACK fuses were/are, especially in comparison with the SR RED fuses, SR has found another break-through in fuses.

1. Musicality ... The system is totally seamless at this point. Its as if there is no system in the room, only a wall to wall, front to back and floor to ceiling music presentation with true to life tonality from the various instruments.

2. Extension ... I’ve seemed to gain about an octave in low bass response. This has the effect of putting more meat on the bones of the instruments. Highs are very extended, breathing new life into my magic percussion recordings. Vibes, chimes, bells, and triangles positioned in the rear of the orchestra all have improved. I’ve experienced no roll-off of the highs what so ever with the new BLUE fuses. Just a more relaxed natural presentation.

3. Dynamics ... This is a huge improvement over the BLACK fuses. Piano and vibes fans ... this is fantastic.

I have a Japanese audiophile CD of Flamenco music ... the foot stomps on the stage, the hand clapping and the castanets are present like never before. Want to hear natural sounding castanets? Get the BLUE fuses.

4. Mid range ... Ha! Put on your favorite Ben Webster album ... and a pair of adult diapers. Play Chris Connor singing "All About Ronnie," its to die for.

Quick .... someone here HAS to buy this double album. Its a bargain at this price. Audiophile sound, excellent performance by the one and only Chris Connor. Yes, its mono ... but so what? Its so good you won’t miss the stereo effects. If you’re the lucky person who scores this album, please post your results here.

http://www.ebay.com/itm/ULTRASONIC-CLEAN-The-Finest-Of-CHRIS-CONNOR-Bethlehem-Jazz-1975-NM-UNPLAYED-...

Overall impressions:

Where the RED fuses took about 20 hours to sound their best, and the BLACK fuses took upwards of 200 hours of total break-in, the BLUE fuses sounded really good right out of the box ... and that’s without doing anything about proper directional positioning. Not that the BLUE fuses don’t need breaking in, they do. The improvement continues through week three. Its a gradual break-in thing where each listening session is better than the last.

Everything I described above continues to break new ground in my system as the fuses continue breaking in. Quite honestly, I find it difficult to tear myself away from the system in order to get things done. Its truly been transformed into a magical music machine. With the expenditure of $150.00 and a 30 day return policy there’s really nothing to lose. In my system, its like upgrading to a better pre amp, amp, CD player or phono stage. Highly recommended.

Kudos to Ted Denney and the entire staff at SR. Amazing stuff, guys. :-)

Frank

PS: If you try the SR BLUE fuses, please post your results here. Seems the naysayers, the Debbie Downers and Negative Nellie’s have hijacked the original RED fuse thread. A pox on their houses and their Pioneer receivers.

Frank



128x128oregonpapa
Post removed 
That would be a good trick since, you know, the Cable Cooker is for uh, cables. The Burn In Track off the XLO Test CD might work. Yeah, that’s the ticket! On second thought, the Cable Cooker COULD be made to burn in fuses. 
Au contraire mon frère, below is the lowdown. Note that it conditions power cables so mid to high amperage power fuses should be a walk in the park. I suspect Alan has a recommendation for conditioning lower amperage fuses as well.  Lots of folks use it for outlets, in-wall Romex, binding posts, and other stuff.

From the FAQ on the website;
What type of cables can be conditioned?
The Cable Cooker can condition most types of audio/video cabling. The front panel includes RCA, BNC, and XLR connectors, plus 5-way speaker binding posts. These binding posts accept spade terminations, banana terminations, and of course, tinned or bare wire. The Cooker does not have an S-video connector on it, but Radio Shack or other popular commercial suppliers have an RCA-to-S video adaptor that may be used to condition that type of cable. Microphone cables, guitar cables, and some headphone cables can be conditioned as well with the use of a ¼” plug-to-RCA adaptor.

In addition to interconnects, speaker cables, and power cables, the Cable Cooker can accommodate USB cables, Ethernet cables, and coaxial antenna / satellite receiver cables.
I am starting my fuse exploration with a modest investment in Schurter ceramic fast-blow. One pair for my mono tube amps, the other for Magnepan .7's.

More later.
So, you’re saying because the Cable Cooker can accommodate power cords it can accommodate fuses? That’s a pretty bold deduction, Sherlock. 🕵🏻‍♂️ How would the Cable Cooker be able to handle the wide variety of fuse sizes and ratings? Answer at 11.