The new Synergistic Research BLUE fuses ....


New SR BLUE fuse thread ...

I’ve replaced all 5 of the SR BLACK fuses in my system with the new SR BLUE fuses. Cold, out of the box, the BLUE fuses stomped the fully broken-in SR BLACKS in a big way. As good as the SR BLACK fuses were/are, especially in comparison with the SR RED fuses, SR has found another break-through in fuses.

1. Musicality ... The system is totally seamless at this point. Its as if there is no system in the room, only a wall to wall, front to back and floor to ceiling music presentation with true to life tonality from the various instruments.

2. Extension ... I’ve seemed to gain about an octave in low bass response. This has the effect of putting more meat on the bones of the instruments. Highs are very extended, breathing new life into my magic percussion recordings. Vibes, chimes, bells, and triangles positioned in the rear of the orchestra all have improved. I’ve experienced no roll-off of the highs what so ever with the new BLUE fuses. Just a more relaxed natural presentation.

3. Dynamics ... This is a huge improvement over the BLACK fuses. Piano and vibes fans ... this is fantastic.

I have a Japanese audiophile CD of Flamenco music ... the foot stomps on the stage, the hand clapping and the castanets are present like never before. Want to hear natural sounding castanets? Get the BLUE fuses.

4. Mid range ... Ha! Put on your favorite Ben Webster album ... and a pair of adult diapers. Play Chris Connor singing "All About Ronnie," its to die for.

Quick .... someone here HAS to buy this double album. Its a bargain at this price. Audiophile sound, excellent performance by the one and only Chris Connor. Yes, its mono ... but so what? Its so good you won’t miss the stereo effects. If you’re the lucky person who scores this album, please post your results here.

http://www.ebay.com/itm/ULTRASONIC-CLEAN-The-Finest-Of-CHRIS-CONNOR-Bethlehem-Jazz-1975-NM-UNPLAYED-...

Overall impressions:

Where the RED fuses took about 20 hours to sound their best, and the BLACK fuses took upwards of 200 hours of total break-in, the BLUE fuses sounded really good right out of the box ... and that’s without doing anything about proper directional positioning. Not that the BLUE fuses don’t need breaking in, they do. The improvement continues through week three. Its a gradual break-in thing where each listening session is better than the last.

Everything I described above continues to break new ground in my system as the fuses continue breaking in. Quite honestly, I find it difficult to tear myself away from the system in order to get things done. Its truly been transformed into a magical music machine. With the expenditure of $150.00 and a 30 day return policy there’s really nothing to lose. In my system, its like upgrading to a better pre amp, amp, CD player or phono stage. Highly recommended.

Kudos to Ted Denney and the entire staff at SR. Amazing stuff, guys. :-)

Frank

PS: If you try the SR BLUE fuses, please post your results here. Seems the naysayers, the Debbie Downers and Negative Nellie’s have hijacked the original RED fuse thread. A pox on their houses and their Pioneer receivers.

Frank



128x128oregonpapa
Bought a Blue Fuse for Primare Pre32. At the end of about 200 hours settled down for some critical listening. Music had more meat on the bones. During burn in time some days things were "WOW" then the next day "What's the hype?" So don't throw in the towel until after a couple hundred hours of burn in. My power amp has 1 external and 7 internal fuses. I thought of replacing 2 of the 7. Has anyone replaced their power amp fuses and if so, what was the outcome? Anyone replace the fuse in their power generator, if yes what were the results (I have a PerfectWave P5 Power Plant)?
@mewsickbuff
Replaced the external fuses in my bat power amp with sr black and the internal fuse of my Exogal ps with sr black.
Both instances there was a very profound change. Even more eye opening was that direction of the fuse also made a big difference so do not be afraid to experiment no matter what the nay sayers may state.
My power amp has 4 internal fuses and I will likely replace those as well in the near future
Totally amazing (and highly satisfying) realizing that your gear is so much better than when you first unboxed it. So I guess wherever there's a fuse it can be upgraded. Great to know. Though the thought of replacing 6 power amp inner fuses (3 along each side wall) is daunting. I'll start with the 2 on the back plate (1 inside & 1 outside).
@geoffkait I put together a device similar to the linked video below to my burn in for the SR blacks for about a four days.  Given what I heard, it seems to have taken the fuse about ~85% of the way there with another jump in performance after it settled in for another 12-15 hours.  Hope that helps.. 

A question for those who have extensive experience with fuses:  Am I correct in assuming that the primary or perhaps only place they would make an audible difference is in the signal path?  Thanks. Ps