Is there such an animal as a RCA analog to USB converter that works?

There are these Uberwaltz, composite analogue left & right Audio and video. Some have a box thingy mid way??

https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1312.R1.TR10.TRC1.A0.H0.Xcomposit+.TRS1&_nkw=composite+to+usb&_sacat=0


Cheers George

So in your opinion I might be better with a switchbox than a passive pre that had say 2 inputs?

Absolutely! A passive preamp with 2 inputs is basically a switchbox + additional stuff (resistors or a transformer) that is directly in the signal path and is unnecessary.

With a pure switchbox, IMO the likeliest source of degradation, should any occur, would be the additional cabling that is necessary. But if you positioned the switchbox close to the Comet chances are good, IMO, that any such effects would be eliminated since the additional cable would be very short.

I should mention, also, that a slight downside of the DB Systems box I referred to is that depending on how the cables that are connected to it are positioned their weight might cause the front of the box to lift up a little bit. I suspect that wouldn’t happen with the Decware unit due to its greater depth.

Best regards,
-- Al

George, thanks, but aren’t those things you linked to designed to interface analog signals TO a computer, rather than providing the audio in USB form as if they ARE a computer? The latter being what Uberwaltz would require, as I understand it.

Best regards,
-- Al

I did see the ones George referred to on eBay myself and came to the conclusion they were not quite what I was needing.
I mean they MIGHT work and price was very fair if they DID work but I do rather like the look of the Decware item atm.
Not saying its a cost no object deal but in reality it is going to be about that as it needs to be a sq no object deal, which pretty much equates to the same thing...lol

I mean they MIGHT work...

No, they definitely won’t work. As I said earlier, the necessary device would have to emulate the USB function of a computer, meaning that it would have to act as a USB "host." That is a completely different and much more complex task than acting as a peripheral which communicates with a computer, under the control of the computer.

Also, even if they did work (which they won’t), their A/D converter function would undoubtedly leave much to be desired, from a sonic standpoint.

Best regards,
-- Al