2. analog
  3. 133024-3034

aluminum platter vs Acrylic not what I thought

I recently got to hear a VPI scout with an aluminum platter and various platter mats.  I am having a hard time trying to understand where the fascination with aluminum is coming from.  The acrylic sounds far better.  Its not even close to my ears.  Is it that some people just never heard the scout with the acrylic platter?  I would strongly encourage anyone who is looking for a used scout with an acrylic platter to really take a good look at it.  It sounds much more like real music and for what these used scouts are going for, they are an incredible value.  Maybe its just system/cartridge synergy.  I actually thing the scout with the acrylic platter sounds just as good if not better and quieter than the classic with the aluminum platter.  The scout sounds more like an older Aries than the Classic does.  The advantage of the classic is the longer arm but I mean for many people, I am not sure you can do much better table than the scout with the acrylic platter for anywhere near to what they go for used and I would say they you could look at tables costing much more and still not get the music satisfaction in many ways that the scout accomplishes.  They just seem to portray the musical experience in a way that sounds right.  Aries and scoutmasters with acrylic have to sound killer.  The only platter that is as good that VPI made are there lead and hybrid metal aluminum/acrylic platter tables.  I think VPI is going in the wrong direction with aluminum.  To me the disadvantages far outweigh the benefits.  Others may disagree but if you find scout w/acrylic for a good deal, I would be all over it.  Sometimes you just don't know what ya have so I will probably hang on to mine for a while.
tzh21y
atmasphere's avatar
atmasphere
11,966 posts
 
A correct platter pad will have the same hardness as vinyl so that any vibration from the LP can be absorbed.

Aluminum and any metal for that matter is far too hard.

Acrylic is too, but obviously less so than metal. IME, the harder the material, the more issues with high frequencies.
lewm
13,334 posts
 
Yes, but the OP inserts a platter mat between the LP and the platter.  Platter mats make a big difference, like adding salt and pepper to your food, regardless of the nature of the platter.  Moreover, nearly all turntables have platters made of some sort of metal, yet the "sound" of the mat can easily be heard.  And while I tend to agree with the idea that you want good coupling of energy into the mat, there is a school of thought that favors isolating the LP in space (e.g., the Resomat and the old Transcriptors platter), which has its fans as well. What a hobby!  Or, what? A hobby?

For what it's worth, I have not liked acrylic mats or platters in the past, but probably that's just me.  The only platter per se that meets your criterion pretty well, Ralph, is one of the several options offered by Thom Mackris on his Galibier turntables.  It may be made of Delrin, but I cannot recall.

Nandric, Try getting loaded on slivovitz instead of acrylic. Acrylic is bad for the liver.
yogiboy's avatar
yogiboy
5,773 posts
 
@tzh21y
The best platters that VPI made were the lead ones. They had to stop making them due to the new environmental laws ( no lead) 20 years ago. VPI claims that these were better than all the others! 
melm
1,084 posts
 
FWIW the original VPI platter was aluminum with a lead insert. When that was replaced on the same turntable with acrylic, also with a lead insert, the review in the (then honest) Absolute Sound said that the original aluminum was clearly awful and that the table really came alive with the acrylic/lead platter. I can personally vouch for the improvement. So acrylic/lead platters became the mainstay of VPI through the early TNT days. The original TNT platter is a great platter and I still use one on my much modified TNT. Lead, by the way, is a perfect substance for that use, not only heavy, but acoustically dead. Try ringing a bell made out of lead!

Eventually, said to be due to environmental concerns, VPI replaced the lead inserts with various metals under the acrylic. Later there were also acrylic platters with no metal. And then the return of the Super Platter: acrylic and steel. Some of the more expensive tables in audio still use an acrylic, or other close plastic material, for the platter.

When VPI went back to aluminum, I was kind of shocked given the history. Back to the future. From all I have been able to gather this was clearly a move simply to lower the cost of production. Apparently high quality acrylic was getting more expensive, and aluminum is cheap and easier to fabricate into platters. As in the original aluminum days, users are scrambling for platter mats of all kinds. And they should.

I have experienced the difference and would never change my platter for the aluminum one.

So bottom line, the OP has a point.
tzh21y OP
1,654 posts
 
We tried different mats and even though they did make a difference, not always better, it just seemed that some frequencies were still affected by what must be the aluminum.  We both came to the conclusion that the Aluminum platter is just not giving us the benefits we hoped for.  Just could not get away from the overly energized platter.  Too much energy.    I guess what I am saying is the Acrylic platter VPIs are really good.  Considering what you can get them for it is a steal.  I have heard the lead and acrylic mix platters that melm spoke about and he is right, no question, no doubt. 
More to discover