Auditorium 23 with Dynavector 20x2l?

the Dyna has a much lower impedance than the Denon 103 for which the A23 step-up was designed.

if it helps, i have a 20x2 that i run into Dyna’s own SUP-200 SUT and it’s a fabulous combination.

So to follow up I've called two dealers - Don Better one of them - and both said that the DV20x2l would work with the A23 standard. Don suggested the SUT-200 as a better fit but of course it's $2600. I'm listening to less vinyl these days and actually making this move to lower my investment in my vinyl rig. I got a good deal on a used A23 and it's on the way so I'll report back. Figured I could try a dl-103 on it while I'm at it and compare. 

I'm running a wood body version of a 103 through the Homage T2, which also is designed around higher impedance Denon, EMT... Cartridges.  VERY good, and I bet it would be hard to beat for it's price bracket and even above.  Recently heard the Dynavector SUT with a Koetsu running through it. Very impressive, which makes sense, because the internal impedance on DV and Koetsu carts are close. I wanna say 6 Ohm. All sounds well thought out davelarz, let us know....

Well we'll see. If the A23 doesn't mate well with the DV20x2 I may have to flip it bc I'm feeling like the DL-103 is not the greatest match for my VPI Classic. It's always something. 

I got my SUP-200 used for about $1500. Works great with the 20X2L. Better then the Audio Note AN-S2 it replaced. I basically put together a Herb Reichert Gramophone Dreams system - Heavily modded SL1200/SME M2/9/20X2L/SUP-200.  I want to move up but the expense would be huge.