2. member-reviews
  3. 133130-481

New Tweak --- Its Fantastic

THE NEW TWEAK

Over the good part of this past year I’ve been beta testing a new tweak, the name of which is "Total Contact." Its a hi-bred graphene contact enhancer that is different from all other contact enhancers that have come and gone for one reason or another. I’m not new to these contact enhancers, having had quite a bit of experience with a product developed by the late Brian Kyle and his "Quick Silver" contact enhancer. The "Total Contact" is different ... a LOT different.

"Total Contact" is graphene based and is not a vibration control. It eliminates micro-arching between two contacts. Micro-arching, much like Micro-vibration smears the sound in our stereo systems. Its the type of distortion that we don’t know is there .... until we eliminate it. There is no break-in as we know it. The sound is improved right off the bat, but what you hear is only a smidgen of what’s to come.

I tested three generations of "TC," each of which was an improvement over the previous incarnation. The final mix was cryogenitically treated and made for a more effective, much smoother application. It comes in a large hypodermic needle type plunger containing 1.5 ml of product and includes a instructional DVD and an application brush.

The application should be applied with a very thin coat to all of your electrical connections .... from your cartridge pins to your power cords. I did my entire system, including the ends of my fuses.

Upon initial application, you will notice an improvement in clarity, correctness of tonal balance and a more overall organic sound. But ... that is just scratching the surface of what this magic paste does. As it cures, the improvements become more apparent. Much more!

There are two real break-through events that happen almost to the day with "Total Contact," one at four weeks and another at eight weeks . At four weeks, you’ll get a real jump in clarity and overall improvement. That’s only a taste though of what’s to come at eight weeks. At eight weeks your system’s focus will make a jump in SQ that is so real - its surreal.

After 40 years in the hobby, and a total tweak nut, I have never heard anything that does what this graphene paste does. The see-through clarity at eight weeks becomes simply amazing. The "paste" eventually cures into a kind of polymer plastic and it seems that the sound improves with each listening session. So, its important that you leave your contacts alone for the duration. If you’re the type of person that continually switches wires in and out, you’ll have to re paste until enough time has elapsed to get "the cure."

The only problem I had was with the first batch and that had to do with shorting out a tube pin in the line stage. Use the "TC" very sparingly on tube pins, if at all. I only had problems with the line stage tube pins. The Amp, CD Player and Phono Stage has had no tube pin problems at all.

Tim Mrock, one of our fellow A’goners, is the developer of the product. Its taken Tim 15 years and several patents to get it right. Tim has "pasted" every electrical contact he can find in his audio system, all of the switches in his circuit breaker box, every contact in his car ... and has used it in commercial applications such as hospital circuit breakers, surgical lights ... and other places where efficiency and long life of electrical components are deemed important.

This product is highly recommended to anyone who truly wants to get the most out of his/her audio systems. There’s enough product in each tube to do at least two audio systems as it just takes a very thin coat on each application to be effective. The last tube was enough to do my system twice and then a friend’s system this past weekend.


Frank

PS: There were a couple of other A’goner beta testers of this product as well. Hopefully, they will chime in here with their experiences for comparison. I "pasted" both of Steve Fleschler’s systems a few days ago, perhaps he will comment on his results too. We forgot to paste Steve’s power cords though, so there’s a lot more to be had from Steve’s two fantastic systems.

Frank
128x128oregonpapa
oregonpapa's avatar
oregonpapa OP
4,867 posts
 
^^^ Perhaps Geoffkait has turned the corner. He must have looked inward and became uncomfortable with his intent. If so, welcome back to the land of the living and the positive thinkers, Geoff. *lol* 

thecarpathian  >>> Valid points. Tim is fully aware of this thread. I think he would agree with Geoff's last post. The release date for the product will be very soon, at which time I suspect that Tim will cover all of the bases to your satisfaction. 

Frank
geoffkait's avatar
geoffkait
23,365 posts
 
I don’t take sides, Papa San.
dynaquest4's avatar
dynaquest4
445 posts
 
"My advice to tweak manufacturers, never explain anything."

Moot advice...They already don't explain anything.  Likely because they don't understand it themselves but they market it very well to those who are easily separated from their money.
oregonpapa's avatar
oregonpapa OP
4,867 posts
 
^^^ As Zig Ziglar would have said: "Just more stinkin’ thinkin' blabbed by a person who undoubtedly needs a check up from the neck up."

When are you going to post your in depth research that allowed you to reach your conclusions?

Frank

falconquest's avatar
falconquest
1,108 posts
 
I had to hit pause to respond to this thread. Can we please just look at this objectively? A couple of guys develop a new product and the beta testers tout its advantages. I say congratulations and good for them. But I'm not going to buy it until it proves itself in the marketplace. I know this is not what some may want to hear but that's what marketing is about. Why so much criticism? If you don't think it's a valid product then move on. If you do and want to try it then it will cost you $300.00. That's it! Take it or leave it or wait until you're convinced that it's a valid product that you really should try. I have been in sales for years and have told people that if you want your electrical connections (not audio products) to repel moisture and act as though moisture were not an issue then give the connection a short blast with LPS-1. It displaces water. You know what convinced me? A demo, where the Rep. placed a running drill motor that he was holding in his hands into a container full of water. The drill motor kept running and the Rep. didn't die. Believe me or not, that's a fact. There were maintenance people who actually jumped backward when they saw this demonstration (please don't do this at home).

For you naysayers.....move on. So what if you think it's snake oil.....we don't care. For those promoting the product, don't argue with the naysayers because it makes you (and the product) look bad. In my mind the best way to market this product is to post a youtube video demonstrating how to apply it and the sonic benefits of it (not necessarily an audio demonstration because well, we know why). Perhaps then people will understand it better. All this bickering back and forth is completely useless and I can tell you that I wouldn't want my product discussed in this manner. I have been in sales for too many years and quite frankly based on this thread I would just walk away. Let's have some civility here. Graphene is becoming a very interesting product. I think it would benefit us all to learn more about its properties and benefits. We have certainly learned nothing from this thread other than this product will soon be available so please, let's move to a higher level here. Geez almighty already! Ok, now I'm hitting "play". 
More to discover