Amps for KEF Blade 2

yysantabarbara,

I was disappointed with the Parasound A23 driving the LS50s, but the A21sounded very good.

I replaced a Proceed HAP 2 with JC 1 monoblocks to drive KEF Reference 107/2s.  The improvement in sound wasn't subtle.  The JC 1s really made the 107/2s sing.

Without too much trouble I could try the Ayre KX-5 Twenty preamp with the JC 1s and 107/2s, and it's something I should do.  OTOH, perhaps I should just keep my beloved 107/2s and forget the Blade 2s.

db

dbphd,
I only noticed today that you had asked me about whether I had the Blades in a previous post. Sorry for not responding. I do not own them yet but today I have the money to buy them (worked a 2nd job for them). So some time in 2018 I will buy them.

I am actually now going for the Blades for my office because I have a new baby (who is very active at 19 months) and I am seeing that the living room could be problematic. Another poster on A’Gon related that he was able to get the Blades to sound good in a 14 x 13 room so that gives me hope for the office.

Just as an FYI, I have a few choices in electronics to figure out from the following list:

1) [PS Audio DS DAC or Mola Mola Tambaqui DAC] + MD 102 Analog Tuner + new Luxman 509x integrated. Not sure if it has enough power, but most reviewers state that Luxman underreports the power specs. I we see soon enough.

2) Briscati M12 (DAC + analog volume) + MD 102 Analog Tuner + [Theta Prometheus or Benchmark AHB2 or Luxman m900u or Briscati M15]

3) Mola Mola Tambaqui DAC (cannot use my MD 102 tuner here) + [Theta Prometheus or Benchmark AHB2 or Luxman m900u or Briscati M15]. Sell the tuner and listen to my beloved KRCW via internet.

I had a large list of high end integrated’s I was looking at but I am starting to see that there are a few really high quality DACs with good volume control or preamps with built in DACs.

Guys as a Blade dealer having both the JC 1, Electrcompaniet, Chord and T+A electronics on the Blades.

Here is our take, the JC 1 were okay amplifiers, not magical and not worth the hype, the Electrcompaniet AW 400 were fantastic and dramatically outperformed the Parasounds, the AW 400 also came down in price to $12k vs the nearly $10k price for the JC1.

A pair of Chord SPM 650 monos were a bit better, and the $32k Chord SPM 1400 were amazing.

We lost the Chord line due to not enough sales, brought in the T+A electronics and quite frankly outperformed the Chord stuff.

We have used the big T+A amp and preamp with the Blades and the sound is amazing! Huge soundstage, fast, tight bass, warm midrange, fantastic stuff.

If you are on the East Coast come in for a listen. 

Dave and Troy
Audio Doctor NJ

For those guys who say yeah right prove it here you can see all the gear we tried with the Blades:

https://www.stereophile.com/content/kef-chord-audio-doctor

https://www.google.com/search?newwindow=1&client=aff-maxthon-maxthon4&affdom=maxthon.com&...:

https://www.stereophile.com/content/audio-doctor-searching-best-everything ( notice the Electros the Chord and the JC 1 same setup then replace the 207 with the Blades

now see the Blades in the same space as the 207.2

https://www.youtube.com/watch?v=1NPIn3pEmI4

Long story short, the T+A gear was the best solid state we ever ran with the Blades, as well as the Persona 9H

https://www.facebook.com/audiodoctor1/photos/pcb.1632190780187462/1632198643520009/?type=3&theat...

We also tried the Thrax gear, the Devialet D400 monos, CJ Arts and a few others the T+A gear has so far come the closest to the mega dollar gear for a fraction of the price which is why we recommend it so highly.

Dave and Troy
Audio Doctor NJ

I heard the Blade Two's at the LA Audio Show with the Hegel H360 and it was surprisingly good. A $6k retail integrated driving a speaker of this magnitude may indicate the load is not all that difficult; just a guess on my belhalf. I'm sure there are better pairings, but for the cost, it was really pretty good.