Putting your components inbetween your speakers.
Made some changes in my room recently, built a new TT Rack and located it on the side of the room, away from an overhead Heat Vent that was spewing Dry Air and Dust. Rebuilt the Center Rack also (smaller, shorter) this has cleaned up the Center Imaging as well. Win, win. https://s20.postimg.org/ldt1t83ct/IMG_1940.jpg https://s20.postimg.org/ixr8fi3bh/IMG_1945.jpg |
For imaging and depth perspective there should be nothing between the speaker, and the back wall between the speakers should be as far back as possible. I can say is Neville Thiele (rip) taught me this, and the result was a no brainer, so much so I even took the wall out in-between the speakers and left just a short 1.5mt wall behind each speaker for loading purpose, and the depth of image increased even more, to a visual/aural placement of depth imagery up to 5mts back behind the speakers. Cheers George |
George, it is about preference also. I do not like an image and soundstage that deep with my system. I prefer layers just behind the plane of the speakers up to 10 ft and in some cases with some layering in front of the plane at the same time. More of a 10th row perspective. Most do not have the endless options to experiment with placement. Some basics to work on in any room: No equipment rack at the first reflection point on the side No equipment rack in corners of the room Equal distance from the sidewall on both speakers No rack between the speakers (a luxury for most) or almost as good - low, beneath the tweeters and equal or less to the MR. Diffusion at first reflection point or absorption - smaller room should use absorption. These basics have worked for me in several rooms I have had some small and some large, but all challenging. Cheers! |
I do not like an image and soundstage that deep with my system. Hang on lets get this right, this is not a false image/depth impression, it doesn’t happen with every recording, only with ones that have been recorded with it, others can sound as flat as a pancake. Just get hold of Chesky sampling and audio test disc, Part 2 Audio setup test tracks, track 12 Image and depth test, at different lengths up to 4mts back from the from the microphone, then you'll realise with your stuff between the speakers you've ruined your image/depth as seen with your eyes and heard with your ears. Cheers George |
