Subwoofer recommendations for mostly music

Hi Sailfishben - At some point in this thread, I did post my Velodyne model - the CHT-8. nothing even close to the quality that the direct drive Velodyne's are reputed to have! Now you know why I wanted to replace it!

If I had the money, I would have gone for an ACI Titan, but my budget was pretty small, so, it's the Rocket for me instead!

can be used for sub duty. They are better than most of the plate amps that come with subs too. Like I said earlier the VMPS larger for 300 and you're done. You won't be wanting in bass quality or bass power. There's a reason they've sold thousands of those subs and they rarely are up for sale compared to how many are out there.

Hi Oakiris,

I own the ACI Titan II (now called the Titan), and I bought my dad the Onix Rocket UFW-10...

I think that while the Titan is definitely a better sub overall (on both music and HT), you will be very happy with the Onix.

The ACI goes lower, and gets louder... it also integrates very nicely due to its dual variable crossovers, but the Onix, with its 1 band parametric equalizer, is no slouch with respect to integration either...

I think you will be particularly impressed on with the UFW-10 on music... On HT, the 10 inch driver runs a bit out of steam... But unless you are looking to "bring down the house" (and annoy your neighbors) I think it will satisfy. Build quality is nothing less than first rate as well... When you see the woodwork, you will understand what I mean. :-)

---Dave

Thanks Dave! I know that the sub may bottom out on some of the action movies, but I think it will do just the same. It is definitely better than the Velodyne I have, which only had an 8" driver and (I think) only went down to the mid 30's in low frequency Hz. And, I wanted a musical sub, so I got one. Maybe next year I'll add a second UFW-10 - or go for the 12" model Rocket is supposed to have out later this year.

I just purchased an REL sub The Q150E. One of the main reasons is the unique set up which provides a high level and low level input. The low level is the traditional rca input that is used for the LFE. The high level is a proprietary connector (sub-side). The other connection is down at your main speaker connections on your receiver or amp. They provide a level control for both the high and low level inputs. The idea is that for music the high level signal sends the same signal as your main speakers and the roll-off is controlled by the sub. It works great at filling out the bottom end on music and even SACD and DVD-Audio. The key is you must set up the main speakers for "large" so a full bandwidth signal is sent to the sub.

My experience is new with this brand, model and hook-up but my first impressions is that it is the most versatile sub I have seen for music and providing accurate control for music.