Binding Post Jumpers - New Product!!!

 Ok, these are now pretty much broken in. Anyone want to buy 16 of these connectors? Not! Ha! 

They have settled down and did take the better part of 100 hours. Still a smidgin more brilliance in the upper mids and highs compared to my bare wire, but now delivered in a smooth and musical manner. They are very smooth and resolving while maintaining the all important musicality. Nice find and thanks to the OP and LAK for making us aware! 

What do you now like compared to before? Do you think more hours of play time would be beneficial. Williewonka suggested more than 120hrs.

Has anyone tried the KLE jumpers?

Yes burn in is required for best sound. It took about 100 hours or so before they totally smoothed out and let the full, natural beauty of my cable come through. I’d say that both the body and smoothness of the mids and highs improved over the 100 hours.

Since these are soldered both the connector and solder joints need run in time. I do wish these were solderless. The designer would do well to offer a set screw type of design for best sound IMHO. Solder has a sound and it does not conduct as well as both the wire or connector it joins together. This could be done pretty simply. 

They are nice sounding connectors and I like the overall design and quality very much. 

@grannyring, I'm glad you like them!
What solder did you use?

@grannyring - would you be so kind as to report back after 200 hours or so - I’m still finding subtle improvements as time goes by - Mine have well over 300 hours now.

I’ve found that the best connection for spades is crimp and then solder because the crimp forms a mechanical joint first and then the solder fills in small spaces with a much smaller amount of solder, which prevents micro arching.

Unfortunately, plugs such as these, along with RCA jacks can only be soldered for an effective joint.

The design point for all KLEI connectors is to use just the right amount of the right type of conductive material in order to optimize the movement of electrons - I don’t understand it fully, but their web site has a few articles.

Adding more material for a screw type of design could possibly diminish the effectiveness of the plug making it no better than the Radio Shack variant and make it more expensive.

So what next - will you try their RCA’s perhaps? - they are excellent also :-)

Cheers - Steve :-)