A brutal review of the Wilson Maxx


I enjoy reading this fellow (Richard Hardesty)

http://www.audioperfectionist.com/PDF%20files/APJ_WD_21.pdf

.
g_m_c
1) ALL speakers are pretty highly coloured to one extent or another. We all know this.

Having said that, there are certain design attributes that we know to work better than others IF measurable accuracy are a high priority. At the price that Wilson charges for their products, one would think that at least "some" of these design attributes "might" be incorporated into their products. Evidently, such is not the case. Nor is that true of MANY other multi-driver designs.

2) Measurements are taken so that we can somehow try to correlate what we hear with repeatable tests and try to figure out how they correspond to one another. When the measurements don't correlate with what we hear, we either aren't taking the tests correctly, testing for the right things and / or the test results aren't being properly interpreted. Either that or our listening skills might not be what we think they are.

3) Without comparitive listening AND controlled test procedures, we would all be in the dark ages of audio. We all know that some products can measure well and sound like crapola ( high negative feedback designs ) and that some products can measure poorly and still sound enjoyable. Speakers are a prime example, especially if the specific "quirks" of the speaker in question tend to cater to one's personal preferences and / or specific room anomalies.

4) Fremer basically states that he likes this product and that all other methods of testing / other's personal preferences / pricing matter not to him. As such, he buys, uses and recommends what he likes, regardless of what others think.

In some ways, this sounds a LOT like what i've been saying for many years i.e. one should buy and use what THEY like, as they will be the one listening to it. This is true even though i offer contrary points of view to what others may like / find to be desirable traits. In this regards, Fremer and i are more alike than different.

5) Fremer has been consistent in his reviews of products and the aforementioned stance that he states here. That is, he also liked and purchased the Cyberlight interconnects, which JA has stated were a technical nightmare and measured attrociously. Personally, i find the Cyberlights to be nothing less than an expensive joke / bad snake oil, but to each their own.

6) As i have stated many times over, one needs to learn how to interpret specs for themselves, understand what those spec's mean, how the spec's were derived and how they correlate to one might expect to hear. This helps to make one an informed consumer and gives them the ability to better wade through / interpret a "review" of ANY product.

7) Without the aid of understanding what is going on in a technical manner, one is at the mercy of what they read and want to believe in any "review:. Obviously, knowing the personal preferences of the specific reviewer and being familiar with their writing styles can also be a big help in that regard.

This is why i like reading Kal Rubinson's and John Marks reviews. I believe that i'm familiar with both their writing styles and what they seek in terms of sonics. On top of that, i also think that they are ethical individuals. Art Dudley also falls into this category, but his "personal preferences" and "belief system" are so different than mine, that i find it hard to relate most of the time. No bunnies for me : )

8) There should be some form of standards as to what is considered "acceptable" and unacceptable" in terms of the reproduction of music using "high fidelity" gear. Otherwise, it all boils down to personal preference with no form of accountability.

In that regard, points should be alloted in specific categories that are deemed most important for the type of equipment under review. One could then better assess whether or not the specific DUT ( Device Under Test ) might meet their needs based on the individual strengths and / or weaknesses based on their scoring in each individual category.

Every product is some form of a compromise. Being able to compare sonic strengths and weaknesses as the reviewer hears / sees them combined with repeatable test results would be FAR more informative than having to read several pages of hyperbole and prose.

9) Personally, i believe that JA's test results and listening skills make for a hard combo to beat. That is, as far as Stereophile reviewers go.

Having said that, that doesn't mean that i have the utmost faith in what he says, how he tests certain products ( a lack of consistency in some areas ) or that he doesn't sometimes soften things so as to be somewhat "cordial" to the manufacturer & potential advertiser. Nobody is perfect and JA at least tries to be a "gentleman" about things. That's more than i can say about myself : )

10) It cracks me up to think that people think that what Hardesty is doing is something new and / or revelatory. Moncrieff did all of the above i.e. calling other reviewers to task and pointing out why some 25+ years ago. In effect, Hardesty comes across as wanting to be the modern day Moncrieff / IAR. Having said that, i can understand why Hardesty might admire / want to emulate Moncrieff and the early days of IAR.

11) Multiple large diameter drivers that are physically spaced a measurable distance apart instantly introduce time, phase and frequency response abberations into the listening equation. Refer back to the first comment that i made and then look at the massive amount of speakers on the market that really aren't designed to operate as "high fidelity" products. Obviously, this includes a LOT of products outside of Wilson's.

12) Fremer put his money where his mouth is and Hardesty has too. They both buy & use ( probably at massively discounted pricing ) what they have recommended to others. As such, how can you fault someone for sharing their honest opinions, even if you completely disagree with them?

13) Listen to some tunes on YOUR "amazing" system that nobody else likes and can poke holes in and see how much you think their opinion is worth then. Then you'll start to realize that it's all a moot point.

Best wishes and good listening to all.... Sean
>

PS... If you notice, i didn't touch Harley's comments / position on this situation with a ten foot pole. That's because i personally find his reviews to be NOT worth getting that close to. Then again, none of that matters when i'm listening to one of my "amazing" systems and i'm quite certain that he feels much the same way about what i think or say : )
I have listened to a lot of wilson speakers. I was unimpressed. I am sure someone could get them to sound good. At those prices it is not my problem. It sort of reminds with Infinity speakers. They never sounded good until a certain manufacturer used them to demo his amps. It reamins as one of my all time best systems. Of course the infinitys sold for a fraction of the wilson's price.
If I may- the emperor has lots of fancy clothes in his closet but every time I see him he is naked as a jaybird.
Samual, Hmmm, by constant stance, I mean Hardesty does conform to one type of engineering method that he feels gives the best chance to a speaker at reproducing the source accurately. Does time and phase coherency ring a bell. Also, he believes in sealed enclosures for bass. He doesn't "Bounce" for the flavor of the month. I haven't seen a lot change in speaker design for a long time. Most are rehash of old designs.
I think sticking with ones principles is a good idea. I couldn't disagree more with your statement he is not being helpful. I guess consumer education is a bad thing? He compares and points out flaws both audible and measurable. And not being truthful---not truthful to what---his long held beliefs and principals? You don't have to agree with the man but he does give the reasons behind his beliefs. And I'll say again, how many reviewers do that. Most describe how it sounds to them and damn the technology. If that is true, then all this becomes a moot point.
As for standard parts, read the watchdog, the drivers are off the shelf stuff. There's nothing high dollar or special here (as in no patented designs.) You would think at these lofty prices, there would be some special engineering or custom drivers or something out of the ordinary that Wilson could brag on other than a car finish.
I'm of the school that appreciates hearing about what another person hears from a product. I am always interested in knowing the context of that experience; which includes time and circumstances with the product, ancilary gear, and previous writings and perspectives. I may consistently disagree with the judgement of a particular writer/poster/reviewer but i get value from that source if i can understand their perspective.

In the case of this thread, i have a major problem with Mr. Hardesty's viewpoint since he tells me nothing about the circumstances of his experience with the MAXX2. Forgetting about his many unfortunate personal attacks on the reviewers; i can't tell from his 'rant' what other factors may have influenced his judgements.

Did Mr. Hardesty have occasion to compare the MAXX2 in a system where he had listened to another comparable speaker? Room issues? Amp differences?

Mr. Hardesty seems to be a lazy guy that wants to draw attention without really doing the work. If he would have approached the MAXX2's with an open mind and some objectivity, explained his methodology and what he heard; and even came to the same conclusions; i would be appeciative and comfortable with his perspective.

I'm a subjectivist that while appreciating the why of things; somewhat resents being told that this or that design cannot sound good. I also don't like an 'all-knowing' tone......explain don't dictate.

Tell me what you hear and the context of that experience.

BTW, i have found that in some cases i have not had the same conclusions that Fremer has had from his speaker reviews; but i have found that his perspectives have been consistent and there have always been enough information to make sense of cause and effect of what he did write. He does the work.

I find conspiracy theorists to be simply 'full of it' and saying more about themselves than their intended targets.

The Wilson MAXX2? i have heard it 10 or so times; 2 friends have them; i have heard them at shows and dealers. I have heard them sound marginal and very good. They are not exactly my cup of tea but none-the-less are pretty good speakers. Were i to be tempted to go further than that i would need to spend considerable time with them in a familiar system. I do think that they perform fine in their general price range.
Sean, Nice summary - or should I say essay :).

I agree with you most that when you read a series of reviews from most/some? reviewers you get a sense of what they like and what their listening tastes/biases are.

Me I have no idea what sam tellig or Ken Kessler listening biases are, except that everything sounds WONDERFUL with correlation to the music playing. my two cents