Rolling KT150s in Primaluna hp integrated

Can you guys share your experience on how hot the amp gets with those tubes?  Many thanks!

From the EL34's 6amp to the KT150's 8amps there will be substantial heater temperature dissipation, if the heater voltage stays at 6.3v and doesn't sag under the extra load that the 150's will put on the filament supply.

Cheers George  

There is no issue with the load imposed by the 150s in this amp. The manufacturer endorses after it did significant testing before doing so.

The power transforners on this amp are massive. That’s why it weighs 60 plus lbs.

With respect to room heating, I live in Chicago so we see all sorts of temperatures from 10 below to 95 to 00 every year. Smaller EL 34 Tubes in their substitutes do not cause too much significant heating in the summer months. But it is definitely noticeable. I went the route of buying a class D amplifier last summer and moving the prima Luna to the basement.

Let me just say that after six months, I sold the class D amplifier and brought the prima Luna back up. I don’t know when I’m going to do this summer. The sound is to to die for so I’m just not sure. I might not care s out the heat. Or, I’ll buy a nice used integrated.

I didn’t have the opportunity to audition all different makes of class D amps. But the one that I did evaluate was not able to impress me long-term.

"The sound is to die for", different amp(s), same result, Jbhiller, I agree. The KT-150 tube is the difference. Temperature effect would depend on many factors, room size, amps, local, season, etc not withstanding George's technical considerations. 
 

In my case it very well may be that there was more miles on my original KT150s than I realized and that putting in fresh tubes made the difference and it had nothing to do with the cryogenic process.

The way to test this, is to send your healthy original used tubes away for cryo'ing (make make sure you get the same ones back by marking them). Then having a listen to them again.

Cheers George    

@georgehifi  PrimaLuna emphasizes that they run their tubes about 1/2 -2/3 as hard as other manufacturers in order to NOT overrun the tubes, especially since PL encourages listeners to tube roll with expensive NOS tubes. I believe the amp also gets a more stable load and presumably lower distortion with not running the tubes so hard and hot. 

@a25105 In the Sta Cruz Mtns, gets up to the high 90s and tops 100' as well. problem is, I live in an old barn converted into a home with cinder blocks under the wood siding. Absorbs heat like a mo-fo. No AC. I would come home from work and not be able to listen to my system! And no plans to move soon.
But the heat from the PL Integrated is from the tubes and the 3 Large Transformers hiding in the back under the metal cover ....