2. amps-preamps
  3. 134635-12741

Best amp/ IC's to go with my Thiel 2.4SB's

Hello All,
It has been many years since I have joined in on the forums, sadly it was because I sold off all of my Ayre components, but fortunately I kept my Thiel speakers. 
As for the amp question I pretty much know the answer before asking, the Ayre V-5Xe. That is the amp I previously owned. But just like before I am at the crossroads of do I go with an Integrated or a stand-alone two-channel. Before I started with the BAT VK-300x SE, Ayre A7-Xe, and finally the Krell KAV-400xi. The Krell out of the three Integrated s performed the best as I was completely surprised at it's power output and ability to drive the Thiels. Then when finances allowed I purchased the V-5xe and the Ayre K-5Xe pre-amp. I have a shot at another V-5Xe, except this one is Black (originally a $250 up-charge) for $2,750 from the original owner.
My second question is at the time I went with AudioQuest Cheetah XLR IC's they were second from the top at the time. I always like the neutrality of AQ's when it came to their sonic footprint. But after working for 5 years for a local company, which will remain unnamed. I found out what many people don't know and that is that all of AQ's cables are marked-up aprrox. 300% from what an employee would pay. Now to me I just won't pay that kind of money I would rather buy something used at half the price. With that being said since I was last in this game I see the Siltech cables which from what I read are high quality and very neutral. Can anyone give me a fair comparison between AQ and Siltech .
Finally, I am trying to decide if I should go with an Integrated first. The only reason I am even considering this is because I have found a very clean Ayre K-5e pre-amp but to be up to date it would be $1,200 to send it back to Ayre to have it brought up to the present K-5 xeMP pre-amp that sells new for $5k. I am looking a a 5 month old Music Fidelity M5si, they are asking $1,500 but is accepting offers, I figure $1,250. It being rated at 150 W @ 8 Ohms and only puts out 265 W per channel @ 4 Ohms.
Sorry for the long thread but I greatly appreciate your input.
Thanks,
David
f1wheels
czbbcl's avatar
czbbcl
1,752 posts
 
For interconnects I would try these they are very good irrespective of price. No affiliation just a satisfied costumer.

https://www.dysonaudio.com/

As for an integrated I would go with Pass but they are fairly pricey. The Thiels like a lot of current to sound their best and the Pass can provide that. 

Chuck 
beetlemania
834 posts
 
I have found a very clean Ayre K-5e pre-amp but to be up to date it would be $1,200 to send it back to Ayre to have it brought up to the present K-5 xeMP pre-amp that sells new for $5k.
I have done 3 Ayre upgrades (AX-7 to "e", CX-7 to "e", and QB-9 to "DSD") and experienced worthwhile improvements for each. Recommended if your budget allows. (BTW, I'm using an AX-5 Twenty on my CS2.4 SEs).

You should visit the "Thiel owners thread" on the Speakers forum. Tom Thiel is going to help Rob Gillum engineer XO upgrades for some Thiel models and I think the CS2.4 will be one of the first done. I think this will likewise prove a worthwhile upgrade.
f1wheels OP
22 posts
 
WoW,
I did not expect so many of you to take your time and give great advice. Ya I know that all of the IC companies are all about the money, it's just when you know the REAL price of the cable it is almost next to impossible to pay retail for them. I of course will not do this, if I have to wait and go without the use of the amp I purchased until I find a used pair of IC's then so be it. There is one last question, I have never had any experience with Pass Labs. The Thiel's, like you all said are "power hungry" and the V-5xe puts out 300 W/CH @ 4 Ohms. There is a Pass Labs X250 in great shape 500 W/CH @ 4 Ohms on Agon right now for the same price as the V-5xe I am looking at. Which one would you choose??
Many thanks to all of you out there, I will have to join the Thiel speaker forum. I always wondered what would happen if one of my drivers went bad, since Thiel is now pretty much out of business? I have had the coherent driver go bad twice in the same speaker and Thiel replaced it.
beetlemania
834 posts
 
Pass and Ayre are both top-shelf. Can’t make a bad decision. I am a fan of the Ayre’s zero-feedback sound and find it a great match with my CS2.4SE. Others say Thiel’s sound better with more power. What did you find lacking when you previously had Ayre?

Thiel is now pretty much out of business?
Yes, but fear not: https://www.coherentsourceservice.com/
Thiel service will continue as ever!

Again, please read "Thiel owners thread: https://forum.audiogon.com/discussions/thiel-owners-2
f1wheels OP
22 posts
 
I did as you asked and posted on the Thiel owners forum. I was wondering if since the diver dimensions are the same on the standard 2.4's could I upgrade mine with drivers from the 2.4 SB's?
As for anything lacking , NOTHING! I never got to a point where I needed more volume then what the Ayre could produce and was always happy with the combination I had Ayre V-5xe, K-5x, and CX-7e with AQ Cheetah XLR IC's and AQ Mont Blanc speaker wire.
Thanks,
David
More to discover