2. analog
  3. 1382205969

SP-10 Mat

I have an SP-10 with a Micro-Seiki copper mat. Now that my system is dialed in in terms of room acoustic treatments and speaker placement I find the Micro-Seiki mat to be a bit too lively but outstanding in terms of dynamics and soundstage. The stock rubber mat is too dull and bloated.

Could someone suggest a mat that falls in between the two, leaning more towards the copper mat sound than stock but less forward in the midrange and treble.
jarrett
chakster's avatar
chakster
6,144 posts
 
@jarrett 

I find the Micro-Seiki mat to be a bit too lively but outstanding in terms of dynamics and soundstage. The stock rubber mat is too dull and bloated.

Yes, the rubber mat must be avoided (imo), Micro CU-180 and CU-500 are great for Technics DDs. 

@downunder 

chakster.  

here is a nice shot of your cu-180 mat on the SP10 mk3.  It does look great on the table


https://c1.staticflickr.com/5/4311/36098054451_b2d7c901a4_b.jpg 

https://c1.staticflickr.com/5/4304/36098053671_7027569509_b.jpg 


I just noticed you placed the mat upside down, mate 
Why? 

 
downunder
1,329 posts
 
I just noticed you placed the mat upside down, mate
Why?


@chakster

Is the cu180 mat really supposed to be with the slight rounded circumference side up, rather than down?

it fits and couples with the platter perfectly either way.

I have flipped it now for a bit of fun. Funny, it feels as if its now slightly lower than the other way - but that’s obviously an illusion.
BTW - Its impossible to remove from the mat from the SP10mk3 platter now :-) How do you do it now easily?

cheers
chakster's avatar
chakster
6,144 posts
 
@downunder hmm, i never tried the upsidedown placement, i think this is correct placement, but CU-500 is much thicker. Yeah, to remove the mat you might need to flip the whole turntable :))   
pryso
1,927 posts
 
downunder, you might two large sections of a tape that won't leave a residue, like blue painter's masking tape.  The ends of the tape being the handles.  Even if some "stickum" is left behind that would be easy to clean off with alcohol.
chakster's avatar
chakster
6,144 posts
 
@pryso the alcohol on copper mat surface is a disaster, must be avoided, it will leave sings that hard to clean. My experience was very bad. 
More to discover