A question on a B&W high pass filter

B'coz a lot of fellas used to read this & RUN on the wrong road.

I found this thread via google when I was researching a question about these filters. I was able to get a B&W 801 high pass filter. This one doesn't have the dip switches to set the filter to a specific 800 series speaker. It is preset for the 801 series B&W speaker only. Would it be bad if I used this filter along with the B&W Matrix 805 bookshelf speakers? I haven't tried it yet and don't want to risk damaging the 805s I have.

Thanks

The short answer is that you probably won't damage your speaker (as long as you don't overpower them), but you also are not going to get much benefit. The filter is preset for the Freq. response of the 801. The variable filter allows you to set the response to the various models (See this link for detailed specs-http://kenrockwell.com/audio/b-w/800-series-bass-alignment-filter.htm). If anything , it might muddy the sound of the speakers. A third party manufactured these devices, and the parts are kinda crappy. If you really want to use the filter, I'd suggest selling this one and keep looking for the variable version with the DIP switches. Good Luck!

Hi Elee

Thanks for the input. I'm following your suggestion. I wonder if I do get the variable version if I should pay to have the parts upgraded. From pictures I've seen of the interior it doesn't look so bad. The power supply I couldn't tell though if it was shoddy.

Jedinite-
Don't know what you are willng to spend, but your other options for better quality are-
1-Get the original, upgrade parts yourself if you have the expertise.
2-Look for a used Golden Flutes Filter specific to the 805- I haven't seen many for sale, and what people are asking is IMHO (upwards of $800) not worth it.
3-Look for a used Krell unit, which has internal switches to set for any matrix series model ( will probably run 1200-2000)