The new Synergistic Research BLUE fuses ....


New SR BLUE fuse thread ...

I’ve replaced all 5 of the SR BLACK fuses in my system with the new SR BLUE fuses. Cold, out of the box, the BLUE fuses stomped the fully broken-in SR BLACKS in a big way. As good as the SR BLACK fuses were/are, especially in comparison with the SR RED fuses, SR has found another break-through in fuses.

1. Musicality ... The system is totally seamless at this point. Its as if there is no system in the room, only a wall to wall, front to back and floor to ceiling music presentation with true to life tonality from the various instruments.

2. Extension ... I’ve seemed to gain about an octave in low bass response. This has the effect of putting more meat on the bones of the instruments. Highs are very extended, breathing new life into my magic percussion recordings. Vibes, chimes, bells, and triangles positioned in the rear of the orchestra all have improved. I’ve experienced no roll-off of the highs what so ever with the new BLUE fuses. Just a more relaxed natural presentation.

3. Dynamics ... This is a huge improvement over the BLACK fuses. Piano and vibes fans ... this is fantastic.

I have a Japanese audiophile CD of Flamenco music ... the foot stomps on the stage, the hand clapping and the castanets are present like never before. Want to hear natural sounding castanets? Get the BLUE fuses.

4. Mid range ... Ha! Put on your favorite Ben Webster album ... and a pair of adult diapers. Play Chris Connor singing "All About Ronnie," its to die for.

Quick .... someone here HAS to buy this double album. Its a bargain at this price. Audiophile sound, excellent performance by the one and only Chris Connor. Yes, its mono ... but so what? Its so good you won’t miss the stereo effects. If you’re the lucky person who scores this album, please post your results here.

http://www.ebay.com/itm/ULTRASONIC-CLEAN-The-Finest-Of-CHRIS-CONNOR-Bethlehem-Jazz-1975-NM-UNPLAYED-...

Overall impressions:

Where the RED fuses took about 20 hours to sound their best, and the BLACK fuses took upwards of 200 hours of total break-in, the BLUE fuses sounded really good right out of the box ... and that’s without doing anything about proper directional positioning. Not that the BLUE fuses don’t need breaking in, they do. The improvement continues through week three. Its a gradual break-in thing where each listening session is better than the last.

Everything I described above continues to break new ground in my system as the fuses continue breaking in. Quite honestly, I find it difficult to tear myself away from the system in order to get things done. Its truly been transformed into a magical music machine. With the expenditure of $150.00 and a 30 day return policy there’s really nothing to lose. In my system, its like upgrading to a better pre amp, amp, CD player or phono stage. Highly recommended.

Kudos to Ted Denney and the entire staff at SR. Amazing stuff, guys. :-)

Frank

PS: If you try the SR BLUE fuses, please post your results here. Seems the naysayers, the Debbie Downers and Negative Nellie’s have hijacked the original RED fuse thread. A pox on their houses and their Pioneer receivers.

Frank



128x128oregonpapa
After trying and keeping the SR Black Duplex and Blue Fuse, I gave a try to their HFT system. Since that worked based on a mix of 32 of them (and not on the speaker face), I tried their Blackbox and Atmosphere XL4. The Blackbox placed unlike where the instructions indicate "at least 3" from a wall) turned out to be great placed 6’ from the front wall in front of the plane of the speakers. The Atmosphere is the most expensive tweak of the above mentioned and does not add as much value as that as the other tweaks; however, it does add to all of them and I can afford it.

I recommend the duplex and fuse tweaks first unless you have an unruly acoustic room problem. Then the HFT system is very, very important.  For me, it eliminated many acoustic panels and other room acoustic controls.

So, people are finally realising what a waste of time and space George is, as I've previously said. Uneducated does as uneducated is. Trust me, George is just the latest vindication of a well-trodden path of no-marks trying to be relevant. He won't be the last.

To wolf_garcia though, two things. I call BS on your claims of extensive testing. You know it's not true, we all do.  By all means have your retort and claim this that or whatever, but YOU have not done extensive testing with SR Blue fuses, I don't care what you say. Just humour me if you need to respond on this particular point, but please don't try and vindicate the claims. Insult me if you have to, I really couldn't care less, but you are talking BS, plain and simple. Or to use posh language, projection.

On the point you *keep* making about a fuse's function though, can we just get one thing straight. Nobody here, as far as I know, is disputing a fuse's function. Nobody. Got that? Nobody. We all know it's supposed to - to use one of your favourite words - melt, to protect the circuit. We get that. Each time you say it again, myself and many others will be saying "we get that".

It's not a fuse's *function* we're analysing here. If you dogmatically keep saying that a fuse is a fuse is a fuse, then essentially you're saying that all metals are the same. A gold wired fuse is, to use your logic, the same as a zinc fuse. It's just protecting the circuit, right? Think about what you're saying. Really stop and think. A fuse has to be made from an electrical conductor. A paper fuse doesn't work. So to say that a fuse CANNOT make a difference is saying that gold is the same as silver is the same as graphene is the same as nickel is the same as zinc is the same as aluminium etc etc. And guess what, wolf, all metals ain't the same. I just don't get how this really basic, elementary fact seems to escape you. I just don't get it. Have you latched onto this "melting" thing to such an extent that you can't see the wider implication of the statement?

I do look forward to having my post dissected and humoured. But in amongst it, maybe try and see this from the converteds' point of view. The price of a fuse to me is inconsequential. If it didn't make any difference, I'd use the 30 day money back guarantee without a second thought, trust me. I've sent products back before and I'd do it again, in a heartbeat. An awful lot of us must be deluding ourselves according to you and a few others. Maybe they work better in some set-ups than others, who knows. But wolf, trust me, really trust me, they can and DO make the sound different in the right application. Cheers.
Another new minimum poster with massive opinions and nearly every post to do with these "snake oil" fuses, it not hard to put two and two together.

Cheers George 
Hey, whaddya know? He’s your opposite. You’re the maximum poster with lightweight opinions and nearly every post having to do with these ”snake oil” fuses. See, it all evens out! 😳
I have chosen not to participate in this thread until now, aside from a single post some time ago in which I responded to a factual question, because I have not felt that I have had anything of a constructive nature to contribute. However I now feel compelled to respond to the following comment:
tel555 4-2-2018
To wolf_garcia though, two things. I call BS on your claims of extensive testing. You know it’s not true, we all do. By all means have your retort and claim this that or whatever, but YOU have not done extensive testing with SR Blue fuses, I don’t care what you say.
First, to set the record straight, Wolf has never claimed to have done any testing with Blue fuses. The lengthy report he provided about his testing some time ago, in another thread, involved SR Black fuses.

More significantly, having read and participated in countless discussions over the years in which Wolf has provided inputs that have been informative, useful, and uniquely and enjoyably humorous, I for one have no doubt whatsoever as to the sincerity or honesty of his posts regarding fuses. Or regarding anything else for that matter. And, frankly, regardless of one’s beliefs about the efficacy of fuse upgrades, I consider it to be the height of arrogance for a member who has been here for only three months, and has a very minimal posting history, to provide such an insulting comment about a long-time member whose lengthy history of posts about non-fuse subjects has been widely respected and appreciated.

Regards,
-- Al