2. misc-audio
  3. 131672-481

The new Synergistic Research BLUE fuses ....

New SR BLUE fuse thread ...

I’ve replaced all 5 of the SR BLACK fuses in my system with the new SR BLUE fuses. Cold, out of the box, the BLUE fuses stomped the fully broken-in SR BLACKS in a big way. As good as the SR BLACK fuses were/are, especially in comparison with the SR RED fuses, SR has found another break-through in fuses.

1. Musicality ... The system is totally seamless at this point. Its as if there is no system in the room, only a wall to wall, front to back and floor to ceiling music presentation with true to life tonality from the various instruments.

2. Extension ... I’ve seemed to gain about an octave in low bass response. This has the effect of putting more meat on the bones of the instruments. Highs are very extended, breathing new life into my magic percussion recordings. Vibes, chimes, bells, and triangles positioned in the rear of the orchestra all have improved. I’ve experienced no roll-off of the highs what so ever with the new BLUE fuses. Just a more relaxed natural presentation.

3. Dynamics ... This is a huge improvement over the BLACK fuses. Piano and vibes fans ... this is fantastic.

I have a Japanese audiophile CD of Flamenco music ... the foot stomps on the stage, the hand clapping and the castanets are present like never before. Want to hear natural sounding castanets? Get the BLUE fuses.

4. Mid range ... Ha! Put on your favorite Ben Webster album ... and a pair of adult diapers. Play Chris Connor singing "All About Ronnie," its to die for.

Quick .... someone here HAS to buy this double album. Its a bargain at this price. Audiophile sound, excellent performance by the one and only Chris Connor. Yes, its mono ... but so what? Its so good you won’t miss the stereo effects. If you’re the lucky person who scores this album, please post your results here.

http://www.ebay.com/itm/ULTRASONIC-CLEAN-The-Finest-Of-CHRIS-CONNOR-Bethlehem-Jazz-1975-NM-UNPLAYED-...

Overall impressions:

Where the RED fuses took about 20 hours to sound their best, and the BLACK fuses took upwards of 200 hours of total break-in, the BLUE fuses sounded really good right out of the box ... and that’s without doing anything about proper directional positioning. Not that the BLUE fuses don’t need breaking in, they do. The improvement continues through week three. Its a gradual break-in thing where each listening session is better than the last.

Everything I described above continues to break new ground in my system as the fuses continue breaking in. Quite honestly, I find it difficult to tear myself away from the system in order to get things done. Its truly been transformed into a magical music machine. With the expenditure of $150.00 and a 30 day return policy there’s really nothing to lose. In my system, its like upgrading to a better pre amp, amp, CD player or phono stage. Highly recommended.

Kudos to Ted Denney and the entire staff at SR. Amazing stuff, guys. :-)

Frank

PS: If you try the SR BLUE fuses, please post your results here. Seems the naysayers, the Debbie Downers and Negative Nellie’s have hijacked the original RED fuse thread. A pox on their houses and their Pioneer receivers.

Frank



128x128oregonpapa
gdhal's avatar
gdhal
1,641 posts
 
thecarpathian - If these fuses are directional, why doesn’t Synergistic Research label them to indicate the direction they are to be installed?

That would expose the fallacy.

wolf_garcia
6,680 posts
 
I seriously doubt that HiFI tuning and SR would be conferencing together, but if they were, why? Planning a sales territory treaty? Trading fuse coating recipes? Deciding on the table settings for a masked ball? One thing claimed "insiders" can't know is the ratio of audiophile fuse "naysayers" to "the faithful." A point successfully ignored by Kaitty. I get continued flack for repeatedly asking why fuses work, and although it's not "rocket science," this this forum thread is about expensive fuses, not rockets. Nobody has yet to make clear in any post anywhere what these special tiny wires do to "gain about an octave in low bass response," or help a system become "transformed into a magical music machine." Without the pesky directional issue. How? Why? Remember, regardless of the quantum coating of vibration damping directional nano juice, it's a teeny, tiny, little wire that is designed to melt.
mitch2
3,898 posts
 
They'd have to test each and every fuse for directionality, adding to the cost.
Not really. If directionality is a function of the wire production (as Geoff suggests) and not the fuse body or end caps, then, assuming the wire comes off a spool, SR should know exactly which direction is optimal and be able to account for that in their machinery and their tiny elves that paint arrows on the fuses. 
tel555
22 posts
 
Haha, he said melt again, oh my. Had to happen sooner or later.

Oh and I LOVE the "my friend loaned me two fuses" BS. Nice. Roughly translated, you went round to your mate's house to hear a system you weren't familiar with, he said he'd bought a couple of fancy fuses, you listened, had nothing to reference it against, and decided they were smoke and mirrors. Lol. How close to the truth am I, wolf? Haha, can't wait for the dummy-spit reply, PLEASE don't disappoint. Priceless. Carry on everyone else.
swampwalker's avatar
swampwalker
5,138 posts
 
I stand corrected. I must admit, Al, that your writing skills are more in line w a JD than an EE ;-). 
More to discover