New Tweak --- Its Fantastic


THE NEW TWEAK

Over the good part of this past year I’ve been beta testing a new tweak, the name of which is "Total Contact." Its a hi-bred graphene contact enhancer that is different from all other contact enhancers that have come and gone for one reason or another. I’m not new to these contact enhancers, having had quite a bit of experience with a product developed by the late Brian Kyle and his "Quick Silver" contact enhancer. The "Total Contact" is different ... a LOT different.

"Total Contact" is graphene based and is not a vibration control. It eliminates micro-arching between two contacts. Micro-arching, much like Micro-vibration smears the sound in our stereo systems. Its the type of distortion that we don’t know is there .... until we eliminate it. There is no break-in as we know it. The sound is improved right off the bat, but what you hear is only a smidgen of what’s to come.

I tested three generations of "TC," each of which was an improvement over the previous incarnation. The final mix was cryogenitically treated and made for a more effective, much smoother application. It comes in a large hypodermic needle type plunger containing 1.5 ml of product and includes a instructional DVD and an application brush.

The application should be applied with a very thin coat to all of your electrical connections .... from your cartridge pins to your power cords. I did my entire system, including the ends of my fuses.

Upon initial application, you will notice an improvement in clarity, correctness of tonal balance and a more overall organic sound. But ... that is just scratching the surface of what this magic paste does. As it cures, the improvements become more apparent. Much more!

There are two real break-through events that happen almost to the day with "Total Contact," one at four weeks and another at eight weeks . At four weeks, you’ll get a real jump in clarity and overall improvement. That’s only a taste though of what’s to come at eight weeks. At eight weeks your system’s focus will make a jump in SQ that is so real - its surreal.

After 40 years in the hobby, and a total tweak nut, I have never heard anything that does what this graphene paste does. The see-through clarity at eight weeks becomes simply amazing. The "paste" eventually cures into a kind of polymer plastic and it seems that the sound improves with each listening session. So, its important that you leave your contacts alone for the duration. If you’re the type of person that continually switches wires in and out, you’ll have to re paste until enough time has elapsed to get "the cure."

The only problem I had was with the first batch and that had to do with shorting out a tube pin in the line stage. Use the "TC" very sparingly on tube pins, if at all. I only had problems with the line stage tube pins. The Amp, CD Player and Phono Stage has had no tube pin problems at all.

Tim Mrock, one of our fellow A’goners, is the developer of the product. Its taken Tim 15 years and several patents to get it right. Tim has "pasted" every electrical contact he can find in his audio system, all of the switches in his circuit breaker box, every contact in his car ... and has used it in commercial applications such as hospital circuit breakers, surgical lights ... and other places where efficiency and long life of electrical components are deemed important.

This product is highly recommended to anyone who truly wants to get the most out of his/her audio systems. There’s enough product in each tube to do at least two audio systems as it just takes a very thin coat on each application to be effective. The last tube was enough to do my system twice and then a friend’s system this past weekend.


Frank

PS: There were a couple of other A’goner beta testers of this product as well. Hopefully, they will chime in here with their experiences for comparison. I "pasted" both of Steve Fleschler’s systems a few days ago, perhaps he will comment on his results too. We forgot to paste Steve’s power cords though, so there’s a lot more to be had from Steve’s two fantastic systems.

Frank
128x128oregonpapa
Dave, I do not know what Pass amps you are using. Mine are XA 160.8s ; They have Thermal Magnetic Breakers. No Fuses.

geoffkait, I will not be converting. I tried HiFi Tuning fuses (a decade ago ?) in my Spectral monos. One blew the next day at turn-on. The second mono still has the HiFi tuning fuse in it. I replaced the blown fuse with a ceramic fuse I got at Ace hardware. I have not noted a difference in sound between the amps. Fuse experiments are done.
Tom,

If manufacturers or dealers have done this; IMHO it would be unethical if they did not inform the public or potential buyers.

 I like to think that the manufacturers and dealers at Axpona are Honest, hard working people who try to earn our buying $$$ the old fashioned way. They earn it; without trickery.

You, theaudiotweak even suggesting this kind of activity is happening should be discounted by all members of this forum.
To be fair, having been invited to CES many times and having been in some of the most outstanding systems ever assembled, I think I can say without fear of contradiction that some if not many exhibitors will use every tactic they can think of to improve their sound to get the very best sound they can. Why wouldn’t they? It’s good to be King. And they wouldn’t necessarily mention whatever tweaks they use or promote them, either. I’m pretty sure the same tactics are probably applied at audio stores. Why wouldn’t they? Race cars use every trick they can possibly think of to gain an advantage. Why wouldn’t they? I even used the photos in the freezer tweak at one show. Was that wrong of me?
Show me a maker who displays their parts lists and sources for those parts on the entry door of the sound room. Do they list their preference for tubes and maker at the show and hand you a print out of the tubes in use and other parts.

Both fuses and tubes are in the signal path so why would one matter and the other not? They both have a conductive filament..Fuses come well before any other device in a circuit..Fuses are maligned by some just as were power cords 20 years past. Fuses or breakers are hooked at the end of a mile long feeder cable coming into your home. An 8 gauge 5 pound power cord banging the heck out of a filament made of mostly terrible conductive material and some UFO solder how could that make an impact on anything after that fact? Would that mono filament present a bandpass or a compressive function along with noise injection on a select component on the other side? What about the differing transfer functions presented by the 3 or more materials contained in a fuse, noise may result..what about vibration of that filament?  

Pass labs does offer up info for all of their different output devices used in their many products for the consumer to evaluate. I know they use breakers on some of their products and thats very appealing.

If a vendor is using premium select parts that are not standard to their product then that modification should be stated. Tom
ultimatezap ...

Getting enough sleep has been a rarity around my parts too. :-)

As a collector of recordings, I have thousands of records and CD’s. Using various tweaks, ESPECIALLY Tim’s TC, has given me a completely new collection.

Glad to hear that you’re getting similar results. :-)


Frank