Audio-Technica ART 7


Good day A,goners :)

I was in love with the AT OC9 III sound until I damaged it accidentally !!!!!!!!!! The needle broke off completely of the cartridge. I am looking for a replacement. 

I am wanting to stay with Audio-Technica, and looking into ART 9 and ART 7. I read the threads here and some other forums in regards to the ART 9 cart. Most likely will go for the ART 9. However, I am curious about the ART 7.

How many of you here are /were ACTUALLY using ART 7? With what phono stage and gain setting? What are the strength and limitation if you are using / used the ART 7?

I will be using it on a Project RMP 9 table with the 9cc Project arm, Simaudio Moon 310Lp phono, XLR cables (6dB additional gain) to BAT pre-amp.  

Thanks a lot for your inputs :)
Subho


 
128x128confuse_upgraditis
@lewm How is your ART-7 competes with Ortofon MC2000 ?

For decades Raul was so enthusiastic about high compliance Ortofon MC2000 LOMC here on audiogon, it was probably long time before he sold his soul to digital.

As the renegade of your ex belowed Moving Magnets, how would you rate MC2000 today compared to the AT ART series @rauliruegas ?
@rauliruegas

... certainly not help any one of us.

2juki will not help you either

I’m sure you’re completey missed my point, as i said i bought very expensive cartridge from 2juki myself based on his 100% positive feedbacks on ebay, but the problem comes much later, nor when you leave a feedback for a cartridge (everything was as described), but a year or more later on when you have to re-tip the cartridge or, in worst case, to re-furbish it.

And in this case the manufacturer or his distributor will check the serial number at the end of the day to find out it’s a grey market unit, not the original serial number, or the serial number that belongs to a very old and completely different model. Then you understand what is a trade off - your very best expensive high-end cartridge is not supported by the designed (manufacturer) and the distributor. Because they are teamed up together against a grey market sellers. If you’re fine with it - then go and buy from 2juki.

If you want forever warranty and amazing service then ALWAYS buy from the official distributors. I can not speak about all cartridges, but i’m talking about very best LOMC.

Also everyone should understand, and i believe they do understand, that 2juki just sell you cartridge once (you can send it back only once, if it’s not as described), but support and service is not his business, he’s just a grey market seller with lowered price for quick sale - that’s it.

The distributor of the same cartridge in your country, luckily i’ve got in tough with very nice distributor (not even in my country), will do the best to treat you right. Trade-in or upgrade is always better. Sometime the distributors offers something that you can’t expect, the discount is also possible. The difference is price is not that much, but you’re dealing with official distributors, not a cheaters.

Grey market dealers are not cheating you directly, they are cheating the manufacturers and distributors, they are in fact manipulates with serial numbers, but people support the cheaters buyin from them. You can discuss 2juki case with any distributor of the products he’s selling. It’s all about sales morality !!!

P.S. Maybe it’s not important for people who don’t mind to send any cartridge to SoundSmith for re-tip or even to install completely different cantilever to make their original cartridge way different (they always think it’s only getting better for some reason).

If your cartridge is not supported by the original manufacturer it’s very bad (imo)
Even used carts are supported by the manufacturer if they are from the valid source, so what’s the point to buy new from gray market if you can’t use the manufacturer/designed once you’ve bought grey market unit? Where is the logic ? Even lightly used cart from the distributor (they do trade in, so they can offer used with huge discount) is better than new from grey market dealer if you think a bit about future.

2juki also sells vintage gear - no problem with that, this is honest business.

Chakster, It seems other guys here, who perhaps live in different countries, are saying they receive unopened factory containers when they order from 2juki, suggesting there was no possibility that 2juki tampered with serial numbers, let alone added a serial number from a different product.  I suppose it's possible that he acts differently for products sold to your country, compared to the US, for example.  In any case, others don't seem to agree about the SN tampering.  That said, it's still possible that the manufacturer might not honor the warranty if the serial number suggests it was not sold through one of their dealers.  I dunno.
I doubt 2juki actually alters serial numbers - what would be his purpose in doing this?
More likely is the local distributor keeps track of serials coming through his distribution chain and can therefore identify serials from other sources. In both cases the item is genuine, but I can see why a local distributor would refuse warranty service. I think most people buying grey market product realize this and weigh it against the often considerably cheaper price.
FWIW I’ve bought from 2juki several times and have always had prompt service and no issues.
When I got my ART9 2juki was closed for the new year and I bought from Thakker - also without issue - and saved $500 on the local price.
violin118 posts04-23-2018 11:06amDave, where in the U.S. can one purchase the ART-9? I have tried the Needle Doctor and LP Gear and they do not show it.
thanks.
Carter

I bought my ART9 from Needle Doctor about a month ago.  They are an authorized dealer.  If it's not on the site, call them.  I went in the shop and had Ken mount mine... so no doubt they are a dealer and they have the ART9 in stock.  I don't know about ART7, but I think so.

As for the ART9, I can tell you that my system has never sounded better. I am not an audio reviewer.  But, to me, it's smooth, the frequency response is very even from top to bottom, and I think it just sound effortless.  Somehow, it seems like the music just flows from this cartridge.  No background noise, the groove is quiet.  Between it and my new Manley Chinook, the system really has never sounded better.  I stepped up to the ART9 after my Dyna 10x5 suffered a bent cantilever.

I have to believe that the ART7 is equally as good, especially with the types of music they say it works best with... Classical and Jazz, I think.