SL1200GAE New Tonearm

unfortunatelly my dialogue with atmasphere was and is from a way different subject.

That is true - mostly an apparent lack of decorum on Raul's part.

Dear @invictus005: """  Just because the tonearm cable is copper, it doesn't mean that the silver tonearm wire portion will not have a positive impact. From my experience, it has a very big impact.

I use silver plated van den Hul ......................................................

I don't use silver anywhere else in the system as it becomes overwhelmingly too much....................."""

you are spot on about silver wires/cables and only ignorant persons think in different way.

Where I disagree with you is that all wired system with silver is " overwhelmingly too much ".
If that happens in any audio system then there are some " faults " in one or some of the audio system chain links but the silver wires.
When you have a better signal conductor over your system all the " trash " comes out.

In my system I use only silver wires/cables ( I re-wire the inside wires in my speakers too. )including in the power cables. Outstanding resolution ! ! !

That's why I recomended to do it to @b

Regards and enjoy the MUSIC NOT DISTORTIONS,
R.

All I have to say is I cannot believe this arm came for free with this table. It is truly a very good arm.

jtsnead- I am using the ortofon LH4000 with the Delos. I am using the headshell wires that came with the LH6000 and also a Orsonic 200 gram record Clamp  With the Glider, I am using a Jelco HS-25 and with the Grace the Stock headshell

JTSnead-  the best cartridge for synergy with this table was the Ortofon Bronze.  The Delos is great as well, needs many hours of run in.  The Bronze was very good.  The Delos just tracks so amazingly that it is hard to take off of the table.  Patience is a virtue with it as it takes a long time to run in.  At least my copy did.  It does not hurt from time to time to use the demagnetizer.